Chapter 39 · Section VII
Plastics and articles thereof
214 lines in 26 headings of the Combined Nomenclature 2026. Each code opens its sheet, with today's duty under the EU-Mercosur Agreement, when it reaches zero, the tariff-rate quota and the requirements.
3901 Polymers of ethylene, in primary forms
- Polyethylene having a specific gravity of less than 0,94
- 3901 10 10 Linear polyethylene
- 3901 10 90 Other
- Polyethylene having a specific gravity of 0,94 or more
- 3901 20 10 Polyethylene in one of the forms mentioned in note 6(b) to this chapter, of a specific gravity of 0,958 or more at 23 °C, containing: — 50 mg/kg or less of aluminium, — 2 mg/kg or less of calcium, — 2 mg/kg or less of chromium, — 2 mg/kg or less of iron, — 2 mg/kg or less of nickel, — 2 mg/kg or less of titanium and — 8 mg/kg or less of vanadium, for the manufacture of chlorosulphonated polyethylene
- 3901 20 90 Other
- 3901 30 00 Ethylene-vinyl acetate copolymers
- 3901 40 00 Ethylene-alpha-olefin copolymers, having a specific gravity of less than 0,94
- Other
- 3901 90 30 Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the forms mentioned in note 6(b) to this chapter
- 3901 90 80 Other
3902 Polymers of propylene or of other olefins, in primary forms
- 3902 10 00 Polypropylene
- 3902 20 00 Polyisobutylene
- 3902 30 00 Propylene copolymers
- Other
- 3902 90 10 A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the forms mentioned in note 6(b) to this chapter
- 3902 90 20 Polybut-1-ene, a copolymer of but-1-ene with ethylene containing by weight 10 % or less of ethylene, or a blend of polybut-1-ene with polyethylene and/or polypropylene containing by weight 10 % or less of polyethylene and/or 25 % or less of polypropylene, in one of the forms mentioned in note 6(b) to this chapter
- 3902 90 90 Other
3903 Polymers of styrene, in primary forms
- Polystyrene
- 3903 11 00 Expansible
- 3903 19 00 Other
- 3903 20 00 Styrene-acrylonitrile (SAN) copolymers
- 3903 30 00 Acrylonitrile-butadiene-styrene (ABS) copolymers
- Other
- 3903 90 10 Copolymer, solely of styrene with allyl alcohol, of an acetyl value of 175 or more
- 3903 90 20 Brominated polystyrene, containing by weight 58 % or more but not more than 71 % of bromine, in one of the forms mentioned in note 6(b) to this chapter
- 3903 90 90 Other
3904 Polymers of vinyl chloride or of other halogenated olefins, in primary forms
- 3904 10 00 Poly(vinyl chloride), not mixed with any other substances
- Other poly(vinyl chloride)
- 3904 21 00 Non-plasticised
- 3904 22 00 Plasticised
- 3904 30 00 Vinyl chloride-vinyl acetate copolymers
- 3904 40 00 Other vinyl chloride copolymers
- Vinylidene chloride polymers
- 3904 50 10 Copolymer of vinylidene chloride with acrylonitrile, in the form of expansible beads of a diameter of 4 micrometres or more but not more than 20 micrometres
- 3904 50 90 Other
- Fluoropolymers
- 3904 61 00 Polytetrafluoroethylene
- Other
- 3904 69 10 Poly(vinyl fluoride), in one of the forms mentioned in note 6(b) to this chapter
- 3904 69 20 Fluoroelastomers FKM
- 3904 69 80 Other
- 3904 90 00 Other
3905 Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers in primary forms
- Poly(vinyl acetate)
- 3905 12 00 In aqueous dispersion
- 3905 19 00 Other
- Vinyl acetate copolymers
- 3905 21 00 In aqueous dispersion
- 3905 29 00 Other
- 3905 30 00 Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups
- Other
- 3905 91 00 Copolymers
- Other
- 3905 99 10 Poly(vinyl formal), in one of the forms mentioned in note 6(b) to this chapter, of a molecular weight of 10 000 or more but not exceeding 40 000 and containing by weight: — 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and — 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol
- 3905 99 90 Other
3906 Acrylic polymers in primary forms
- 3906 10 00 Poly(methyl methacrylate)
- Other
- 3906 90 10 Poly[N -(3-hydroxyimino-1,1-dimethylbutyl)acrylamide]
- 3906 90 20 Copolymer of 2-diisopropylaminoethyl methacrylate with decyl methacrylate, in the form of a solution in N,N -dimethylacetamide, containing by weight 55 % or more of copolymer
- 3906 90 30 Copolymer of acrylic acid with 2-ethylhexyl acrylate, containing by weight 10 % or more but not more than 11 % of 2-ethylhexyl acrylate
- 3906 90 40 Copolymer of acrylonitrile with methyl acrylate, modified with polybutadiene-acrylonitrile (NBR)
- 3906 90 50 Polymerisation product of acrylic acid with alkyl methacrylate and small quantities of other monomers, for use as a thickener in the manufacture of textile printing pastes
- 3906 90 60 Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not compounded with silica
- 3906 90 90 Other
3907 Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms
- 3907 10 00 Polyacetals
- Other polyethers
- 3907 21 00 Bis(polyoxyethylene) methylphosphonate
- Other
- Polyether alcohols
- 3907 29 11 Polyethylene glycols
- 3907 29 20 Other
- Other
- 3907 29 91 Copolymer of 1-chloro-2,3-epoxypropane with ethylene oxide
- 3907 29 99 Other
- 3907 30 00 Epoxide resins
- 3907 40 00 Polycarbonates
- 3907 50 00 Alkyd resins
- Poly(ethylene terephthalate)
- 3907 61 00 Having a viscosity number of 78 ml/g or higher
- 3907 69 00 Other
- 3907 70 00 Poly(lactic acid)
- Other polyesters
- Unsaturated
- 3907 91 10 Liquid
- 3907 91 90 Other
- Other
- 3907 99 05 Thermoplastic liquid crystal aromatic polyester copolymers
- 3907 99 10 Poly(ethylene naphthalene-2,6-dicarboxylate)
- 3907 99 80 Other
3908 Polyamides in primary forms
3909 Amino-resins, phenolic resins and polyurethanes, in primary forms
- 3909 10 00 Urea resins; thiourea resins
- 3909 20 00 Melamine resins
- Other amino-resins
- 3909 31 00 Poly(methylene phenyl isocyanate) (crude MDI, polymeric MDI)
- 3909 39 00 Other
- 3909 40 00 Phenolic resins
- Polyurethanes
- 3909 50 10 Polyurethane of 2,2′-(tert -butylimino)diethanol and 4,4′-methylenedicyclohexyl diisocyanate, in the form of a solution in N,N -dimethylacetamide, containing by weight 50 % or more of polymer
- 3909 50 90 Other
3910 Silicones in primary forms
3911 Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in note 3 to this chapter, not elsewhere specified or included, in primary forms
- 3911 10 00 Petroleum resins, coumarone, indene or coumarone-indene resins and polyterpenes
- 3911 20 00 Poly(1,3-phenylene methylphosphonate)
- Other
- Condensation or rearrangement polymerisation products whether or not chemically modified
- 3911 90 11 Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene), in one of the forms mentioned in note 6(b) to this chapter
- 3911 90 13 Poly(thio-1,4-phenylene)
- 3911 90 19 Other
- Other
- 3911 90 92 Copolymer of p -cresol and divinylbenzene, in the form of a solution in N,N -dimethylacetamide containing by weight 50 % or more of polymer; hydrogenated copolymers of vinyltoluene and α-methylstyrene
- 3911 90 99 Other
3912 Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms
- Cellulose acetates
- 3912 11 00 Non-plasticised
- 3912 12 00 Plasticised
- Cellulose nitrates (including collodions)
- Non-plasticised
- 3912 20 11 Collodions and celloidin
- 3912 20 19 Other
- 3912 20 90 Plasticised
- Cellulose ethers
- 3912 31 00 Carboxymethylcellulose and its salts
- Other
- 3912 39 20 Hydroxypropylcellulose
- 3912 39 85 Other
- Other
- 3912 90 10 Cellulose esters
- 3912 90 90 Other
3913 Natural polymers (for example, alginic acid) and modified natural polymers (for example, hardened proteins, chemical derivatives of natural rubber), not elsewhere specified or included, in primary forms
3914 Ion-exchangers based on polymers of headings 3901 to 3913, in primary forms
3915 Waste, parings and scrap, of plastics
- Of polymers of ethylene
- 3915 10 10 Having a specific gravity of less than 0,94 (for example, PE-LD)
- 3915 10 20 Having a specific gravity of 0,94 or more (for example, PE-HD)
- 3915 20 00 Of polymers of styrene
- 3915 30 00 Of polymers of vinyl chloride
- Of other plastics
- 3915 90 11 Of polymers of propylene
- 3915 90 20 Of polymers of ethylene terephthalate (for example, PET)
- 3915 90 70 Other
3916 Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics
3917 Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics
- Artificial guts (sausage casings) of hardened protein or of cellulosic materials
- 3917 10 10 Of hardened protein
- 3917 10 90 Of cellulosic materials
- Tubes, pipes and hoses, rigid
- Of polymers of ethylene
- 3917 21 10 Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
- 3917 21 90 Other
- Of polymers of propylene
- 3917 22 10 Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
- 3917 22 90 Other
- Of polymers of vinyl chloride
- 3917 23 10 Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
- 3917 23 90 Other
- 3917 29 00 Of other plastics
- Other tubes, pipes and hoses
- 3917 31 00 Flexible tubes, pipes and hoses, having a minimum burst pressure of 27,6 MPa
- 3917 32 00 Other, not reinforced or otherwise combined with other materials, without fittings
- 3917 33 00 Other, not reinforced or otherwise combined with other materials, with fittings
- 3917 39 00 Other
- 3917 40 00 Fittings
3918 Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9 to this chapter
3919 Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls
- In rolls of a width not exceeding 20 cm
- Strips, the coating of which consists of unvulcanised natural or synthetic rubber
- 3919 10 12 Of poly(vinyl chloride) or of polyethylene
- 3919 10 15 Of polypropylene
- 3919 10 19 Other
- 3919 10 80 Other
- Other
- 3919 90 20 Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers
- 3919 90 80 Other
3920 Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
- Of polymers of ethylene
- Of a thickness not exceeding 0,125 mm
- Of polyethylene having a specific gravity of
- Less than 0,94
- 3920 10 23 Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits
- 3920 10 24 Stretch film, not printed
- 3920 10 25 Other
- 3920 10 28 0,94 or more
- 3920 10 40 Other
- Of a thickness exceeding 0,125 mm
- 3920 10 81 Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent
- 3920 10 89 Other
- Of polymers of propylene
- Of a thickness not exceeding 0,10 mm
- 3920 20 21 Biaxially oriented
- 3920 20 29 Other
- 3920 20 80 Of a thickness exceeding 0,10 mm
- 3920 30 00 Of polymers of styrene
- Of polymers of vinyl chloride
- Containing by weight not less than 6 % of plasticisers
- 3920 43 10 Of a thickness not exceeding 1 mm
- 3920 43 90 Of a thickness exceeding 1 mm
- Other
- 3920 49 10 Of a thickness not exceeding 1 mm
- 3920 49 90 Of a thickness exceeding 1 mm
- Of acrylic polymers
- 3920 51 00 Of poly(methyl methacrylate)
- Other
- 3920 59 10 Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150 micrometres
- 3920 59 90 Other
- Of polycarbonates, alkyd resins, polyallyl esters or other polyesters
- 3920 61 00 Of polycarbonates
- Of poly(ethylene terephthalate)
- Of a thickness not exceeding 0,35 mm
- 3920 62 12 Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates
- 3920 62 19 Other
- 3920 62 90 Of a thickness exceeding 0,35 mm
- 3920 63 00 Of unsaturated polyesters
- 3920 69 00 Of other polyesters
- Of cellulose or its chemical derivatives
- 3920 71 00 Of regenerated cellulose
- Of cellulose acetate
- 3920 73 10 Film in rolls or in strips, for cinematography or photography
- 3920 73 80 Other
- Of other cellulose derivatives
- 3920 79 10 Of vulcanised fibre
- 3920 79 90 Other
- Of other plastics
- 3920 91 00 Of poly(vinyl butyral)
- 3920 92 00 Of polyamides
- 3920 93 00 Of amino-resins
- 3920 94 00 Of phenolic resins
- Of other plastics
- Of condensation or rearrangement polymerisation products, whether or not chemically modified
- 3920 99 21 Polyimide foil and strip, uncoated, or coated or covered solely with plastic
- 3920 99 28 Other
- Of addition polymerisation products
- 3920 99 52 Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97 % or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1 mm
- 3920 99 53 Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells
- 3920 99 59 Other
- 3920 99 90 Other
3921 Other plates, sheets, film, foil and strip, of plastics
- Cellular
- 3921 11 00 Of polymers of styrene
- 3921 12 00 Of polymers of vinyl chloride
- Of polyurethanes
- 3921 13 10 Flexible
- 3921 13 90 Other
- 3921 14 00 Of regenerated cellulose
- 3921 19 00 Of other plastics
- Other
- Of condensation or rearrangement polymerisation products, whether or not chemically modified
- 3921 90 10 Of polyesters
- 3921 90 30 Of phenolic resins
- Of amino-resins
- Laminated
- 3921 90 41 High-pressure laminates with a decorative surface on one or both sides
- 3921 90 43 Other
- 3921 90 49 Other
- 3921 90 55 Other
- 3921 90 60 Of addition polymerisation products
- 3921 90 90 Other
3922 Baths, shower-baths, sinks, washbasins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics
3923 Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics
- Boxes, cases, crates and similar articles
- 3923 10 10 Boxes, cases, crates and similar articles, of plastic, specially shaped or fitted for the conveyance or packing of semiconductor wafers, masks, or reticles
- 3923 10 90 Other
- Sacks and bags (including cones)
- 3923 21 00 Of polymers of ethylene
- Of other plastics
- 3923 29 10 Of poly(vinyl chloride)
- 3923 29 90 Other
- Carboys, bottles, flasks and similar articles
- 3923 30 10 Of a capacity not exceeding two litres
- 3923 30 90 Of a capacity exceeding two litres
- Spools, cops, bobbins and similar supports
- 3923 40 10 Spools, reels and similar supports for photographic and cinematographic film or for tapes, films and the like of heading 8523
- 3923 40 90 Other
- Stoppers, lids, caps and other closures
- 3923 50 10 Caps and capsules for bottles
- 3923 50 90 Other
- 3923 90 00 Other
3924 Tableware, kitchenware, other household articles and hygienic or toilet articles, of plastics
3925 Builders' ware of plastics, not elsewhere specified or included
- 3925 10 00 Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300 litres
- 3925 20 00 Doors, windows and their frames and thresholds for doors
- 3925 30 00 Shutters, blinds (including venetian blinds) and similar articles and parts thereof
- Other
- 3925 90 10 Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings
- 3925 90 20 Trunking, ducting and cable trays for electrical circuits
- 3925 90 80 Other
3926 Other articles of plastics and articles of other materials of headings 3901 to 3914
- 3926 10 00 Office or school supplies
- 3926 20 00 Articles of apparel and clothing accessories (including gloves, mittens and mitts)
- 3926 30 00 Fittings for furniture, coachwork or the like
- 3926 40 00 Statuettes and other ornamental articles
- Other
- 3926 90 50 Perforated buckets and similar articles used to filter water at the entrance to drains
- 3926 90 60 Protective face shields/visors
- 3926 90 97 Other
Source of the titles Commission Implementing Regulation (EU) 2025/1926, Annex I.