Sector guide · 578 lines

Exporting steel and ferro-alloys to the European Union

Iron, steel, ferro-alloys such as ferro-silicon, scrap (chapter 72) and articles of iron or steel, such as tubes, sections, screws and containers (chapter 73).

Exporting steel and ferro-alloys from Argentina to the European Union covers 578 lines of the Combined Nomenclature 2026. Under the EU-Mercosur Agreement, 538 enter duty-free today and 40 are being phased out (the last ones reach zero on 1 January 2033). 306 lines are also subject to trade defence the agreement does not reduce (Implementing Regulation (EU) 2025/2351 and Regulation (EU) 2026/1384, Article 2). Data as of 30 October 2026, from the EU-Mercosur Interim Trade Agreement and the Combined Nomenclature 2026.

Lines covered

The guide takes every line of the Combined Nomenclature in force that starts with these codes, 578 lines in all. Each one has its own sheet.

  • Chapter 72 · The whole of chapter 72 · 344 lines
  • Chapter 73 · The whole of chapter 73 · 234 lines

Source Implementing Regulation (EU) 2025/1926, Annex I (Combined Nomenclature 2026)

The duty under the agreement

What each line pays today to enter the European Union from Argentina under the agreement, counted line by line with the same calculation as its sheet.

  • 426lines enter duty-free with or without the agreement
  • 112lines enter duty-free thanks to the agreement
  • 40lines pay less and go down year by year

On top of that, 306 lines are subject to trade defence the agreement does not reduce. What is paid and how to avoid it.

When they reach zero

The lines that do not enter duty-free in every case (they pay something, the figure depends on composition or the entry price, or the reduction applies only within a quota), by the year the schedule takes the duty under the agreement to zero.

  • 1 January 2030 · 34 lines
  • 1 January 2033 · 6 lines

What changes on 1 January 2027

On 1 January 2027 the duty goes down one step on 40 lines. It comes from the next step down on the sheet of each line, with the same calculation.

Line by line

Grouped by heading. The code opens the sheet, with the year-by-year schedule and the source of every figure.

7201 · Pig iron and spiegeleisen in pigs, blocks or other primary forms · 7 lines
LineToday under the agreementWithout itReaches 0Quota
7201 10 11 Pig iron and spiegeleisen in pigs › Containing by weight 1 % or less of siliconCompare with other products (7201 10 11)1.3%1.7%1 January 2030·
7201 10 19 Pig iron and spiegeleisen in pigs › Containing by weight more than 1 % of siliconCompare with other products (7201 10 19)1.3%1.7%1 January 2030·
7201 10 30 Pig iron and spiegeleisen in pigs › Containing by weight not less than 0,1 % but less than 0,4 % of manganeseCompare with other products (7201 10 30)1.3%1.7%1 January 2030·
7201 10 90 Pig iron and spiegeleisen in pigs › Containing by weight less than 0,1 % of manganeseCompare with other products (7201 10 90)0%0%··
7201 20 00 Pig iron and spiegeleisen in pigs › Non-alloy pig iron containing by weight more than 0,5 % of phosphorusCompare with other products (7201 20 00)1.7%2.2%1 January 2030·
7201 50 10 Pig iron and spiegeleisen in pigs › Alloy pig iron containing by weight ≥ 0,3 % but not more than 1 % of titanium and ≥ 0,5 % but not more than 1 %…Compare with other products (7201 50 10)0%0%··
7201 50 90 Pig iron and spiegeleisen in pigs › Alloy pig iron; spiegeleisen › OtherCompare with other products (7201 50 90)1.3%1.7%1 January 2030·
7202 · Ferro-alloys · 22 lines
LineToday under the agreementWithout itReaches 0Quota
7202 11 20 Ferro-alloys › With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 %Compare with other products (7202 11 20)2.1%2.7%1 January 2030·
7202 11 80 Ferro-alloys › Containing by weight more than 2 % of carbon › OtherCompare with other products (7202 11 80)2.1%2.7%1 January 2030·
7202 19 00 Ferro-manganese › OtherCompare with other products (7202 19 00)2.1%2.7%1 January 2030·
7202 21 00 Ferro-alloys › Containing by weight more than 55 % of siliconCompare with other products (7202 21 00)4.9%Also, outside the quota has a minimum price of €2,408/t5.7%1 January 2033·
7202 29 10 Ferro-alloys › Containing by weight 4 % or more but not more than 10 % of magnesiumCompare with other products (7202 29 10)4.9%Also, outside the quota has a minimum price of €2,408/t5.7%1 January 2033·
7202 29 90 Ferro-silicon › OtherCompare with other products (7202 29 90)4.9%Also, outside the quota has a minimum price of €2,408/t5.7%1 January 2033·
7202 30 00 Ferro-silico-manganeseCompare with other products (7202 30 00)2.9%3.7%1 January 2030·
7202 41 10 Ferro-alloys › Containing by weight more than 4 % but not more than 6 % of carbonCompare with other products (7202 41 10)3.2%4%1 January 2030·
7202 41 90 Ferro-alloys › Containing by weight more than 6 % of carbonCompare with other products (7202 41 90)3.2%4%1 January 2030·
7202 49 10 Ferro-alloys › Containing by weight not more than 0,05 % of carbonCompare with other products (7202 49 10)6.1%7%1 January 2033·
7202 49 50 Ferro-alloys › Containing by weight more than 0,05 % but not more than 0,5 % of carbonCompare with other products (7202 49 50)6.1%7%1 January 2033·
7202 49 90 Ferro-alloys › Containing by weight more than 0,5 % but not more than 4 % of carbonCompare with other products (7202 49 90)6.1%7%1 January 2033·
7202 50 00 Ferro-silico-chromiumCompare with other products (7202 50 00)0%0%··
7202 60 00 Ferro-nickelCompare with other products (7202 60 00)0%0%··
7202 70 00 Ferro-molybdenumCompare with other products (7202 70 00)2.1%2.7%1 January 2030·
7202 80 00 Ferro-tungsten and ferro-silico-tungstenCompare with other products (7202 80 00)0%0%··
7202 91 00 Ferro-titanium and ferro-silico-titaniumCompare with other products (7202 91 00)2.1%2.7%1 January 2030·
7202 92 00 Ferro-vanadiumCompare with other products (7202 92 00)2.1%2.7%1 January 2030·
7202 93 00 Ferro-niobiumCompare with other products (7202 93 00)0%0%··
7202 99 10 Ferro-phosphorusCompare with other products (7202 99 10)0%0%··
7202 99 30 Ferro-silico-magnesiumCompare with other products (7202 99 30)2.1%2.7%1 January 2030·
7202 99 80 Ferro-alloys › OtherCompare with other products (7202 99 80)2.1%2.7%1 January 2030·
7203 · Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having… · 2 lines
LineToday under the agreementWithout itReaches 0Quota
7203 10 00 Ferrous products obtained by direct reduction of iron oreCompare with other products (7203 10 00)0%0%··
7203 90 00 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products › OtherCompare with other products (7203 90 00)0%0%··
7204 · Ferrous waste and scrap; remelting scrap ingots of iron or steel · 12 lines
LineToday under the agreementWithout itReaches 0Quota
7204 10 00 Waste and scrap of cast ironCompare with other products (7204 10 00)0%0%··
7204 21 10 Ferrous waste and scrap › Containing by weight 8 % or more of nickelCompare with other products (7204 21 10)0%0%··
7204 21 90 Ferrous waste and scrap › Of stainless steel › OtherCompare with other products (7204 21 90)0%0%··
7204 29 00 Waste and scrap of alloy steel › OtherCompare with other products (7204 29 00)0%0%··
7204 30 00 Waste and scrap of tinned iron or steelCompare with other products (7204 30 00)0%0%··
7204 41 10 Ferrous waste and scrap › Turnings, shavings, chips, milling waste, sawdust and filingsCompare with other products (7204 41 10)0%0%··
7204 41 91 Ferrous waste and scrap › In bundlesCompare with other products (7204 41 91)0%0%··
7204 41 99 Ferrous waste and scrap › Trimmings and stampings › OtherCompare with other products (7204 41 99)0%0%··
7204 49 10 Ferrous waste and scrap › Fragmentised (shredded)Compare with other products (7204 49 10)0%0%··
7204 49 30 Ferrous waste and scrap › In bundlesCompare with other products (7204 49 30)0%0%··
7204 49 90 Ferrous waste and scrap › Other waste and scrap › OtherCompare with other products (7204 49 90)0%0%··
7204 50 00 Remelting scrap ingotsCompare with other products (7204 50 00)0%0%··
7205 · Granules and powders, of pig iron, spiegeleisen, iron or steel · 3 lines
LineToday under the agreementWithout itReaches 0Quota
7205 10 00 GranulesCompare with other products (7205 10 00)0%0%··
7205 21 00 Granules and powders › Of alloy steelCompare with other products (7205 21 00)0%0%··
7205 29 00 Powders › OtherCompare with other products (7205 29 00)0%0%··
7206 · Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203) · 2 lines
LineToday under the agreementWithout itReaches 0Quota
7206 10 00 IngotsCompare with other products (7206 10 00)0%0%··
7206 90 00 Iron and non-alloy steel in ingots or other primary forms › OtherCompare with other products (7206 90 00)0%0%··
7207 · Semi-finished products of iron or non-alloy steel · 18 lines
LineToday under the agreementWithout itReaches 0Quota
7207 11 11 Semi-finished products of iron or non-alloy steel › Of free-cutting steelCompare with other products (7207 11 11)0%0%··
7207 11 14 Semi-finished products of iron or non-alloy steel › Of a thickness not exceeding 130 mmCompare with other products (7207 11 14)0%0%··
7207 11 16 Semi-finished products of iron or non-alloy steel › Of a thickness exceeding 130 mmCompare with other products (7207 11 16)0%0%··
7207 11 90 Semi-finished products of iron or non-alloy steel › ForgedCompare with other products (7207 11 90)0%0%··
7207 12 10 Semi-finished products of iron or non-alloy steel › Rolled or obtained by continuous castingCompare with other products (7207 12 10)0%0%··
7207 12 90 Semi-finished products of iron or non-alloy steel › ForgedCompare with other products (7207 12 90)0%0%··
7207 19 12 Semi-finished products of iron or non-alloy steel › Rolled or obtained by continuous castingCompare with other products (7207 19 12)0%0%··
7207 19 19 Semi-finished products of iron or non-alloy steel › ForgedCompare with other products (7207 19 19)0%0%··
7207 19 80 Semi-finished products of iron or non-alloy steel › Containing by weight less than 0,25 % of carbon › OtherCompare with other products (7207 19 80)0%0%··
7207 20 11 Semi-finished products of iron or non-alloy steel › Of free-cutting steelCompare with other products (7207 20 11)0%0%··
7207 20 15 Semi-finished products of iron or non-alloy steel › 0,25 % or more but less than 0,6 % of carbonCompare with other products (7207 20 15)0%0%··
7207 20 17 Semi-finished products of iron or non-alloy steel › 0,6 % or more of carbonCompare with other products (7207 20 17)0%0%··
7207 20 19 Semi-finished products of iron or non-alloy steel › ForgedCompare with other products (7207 20 19)0%0%··
7207 20 32 Semi-finished products of iron or non-alloy steel › Rolled or obtained by continuous castingCompare with other products (7207 20 32)0%0%··
7207 20 39 Semi-finished products of iron or non-alloy steel › ForgedCompare with other products (7207 20 39)0%0%··
7207 20 52 Semi-finished products of iron or non-alloy steel › Rolled or obtained by continuous castingCompare with other products (7207 20 52)0%0%··
7207 20 59 Semi-finished products of iron or non-alloy steel › ForgedCompare with other products (7207 20 59)0%0%··
7207 20 80 Semi-finished products of iron or non-alloy steel › Containing by weight 0,25 % or more of carbon › OtherCompare with other products (7207 20 80)0%0%··
7208 · Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated · 20 lines
LineToday under the agreementWithout itReaches 0Quota
7208 10 00 Flat-rolled products of iron or non-alloy steel › In coils, not further worked than hot-rolled, with patterns in reliefCompare with other products (7208 10 00)0%Also, outside the quota pays an additional 50%0%··
7208 25 00 Flat-rolled products of iron or non-alloy steel › Of a thickness of 4,75 mm or moreCompare with other products (7208 25 00)0%Also, outside the quota pays an additional 50%0%··
7208 26 00 Flat-rolled products of iron or non-alloy steel › Of a thickness of 3 mm or more but less than 4,75 mmCompare with other products (7208 26 00)0%Also, outside the quota pays an additional 50%0%··
7208 27 00 Flat-rolled products of iron or non-alloy steel › Of a thickness of less than 3 mmCompare with other products (7208 27 00)0%Also, outside the quota pays an additional 50%0%··
7208 36 00 Flat-rolled products of iron or non-alloy steel › Of a thickness exceeding 10 mmCompare with other products (7208 36 00)0%Also, outside the quota pays an additional 50%0%··
7208 37 00 Flat-rolled products of iron or non-alloy steel › Of a thickness of 4,75 mm or more but not exceeding 10 mmCompare with other products (7208 37 00)0%Also, outside the quota pays an additional 50%0%··
7208 38 00 Flat-rolled products of iron or non-alloy steel › Of a thickness of 3 mm or more but less than 4,75 mmCompare with other products (7208 38 00)0%Also, outside the quota pays an additional 50%0%··
7208 39 00 Flat-rolled products of iron or non-alloy steel › Of a thickness of less than 3 mmCompare with other products (7208 39 00)0%Also, outside the quota pays an additional 50%0%··
7208 40 00 Flat-rolled products of iron or non-alloy steel › Not in coils, not further worked than hot-rolled, with patterns in reliefCompare with other products (7208 40 00)0%Also, outside the quota pays an additional 50%0%··
7208 51 20 Flat-rolled products of iron or non-alloy steel › Of a thickness exceeding 15 mmCompare with other products (7208 51 20)0%Also, outside the quota pays an additional 50%0%··
7208 51 91 Flat-rolled products of iron or non-alloy steel › 2 050 mm or moreCompare with other products (7208 51 91)0%Also, outside the quota pays an additional 50%0%··
7208 51 98 Flat-rolled products of iron or non-alloy steel › Less than 2 050 mmCompare with other products (7208 51 98)0%Also, outside the quota pays an additional 50%0%··
7208 52 10 Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mmCompare with other products (7208 52 10)0%Also, outside the quota pays an additional 50%0%··
7208 52 91 Flat-rolled products of iron or non-alloy steel › 2 050 mm or moreCompare with other products (7208 52 91)0%Also, outside the quota pays an additional 50%0%··
7208 52 99 Flat-rolled products of iron or non-alloy steel › Less than 2 050 mmCompare with other products (7208 52 99)0%Also, outside the quota pays an additional 50%0%··
7208 53 10 Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or moreCompare with other products (7208 53 10)0%Also, outside the quota pays an additional 50%0%··
7208 53 90 Flat-rolled products of iron or non-alloy steel › Of a thickness of 3 mm or more but less than 4,75 mm › OtherCompare with other products (7208 53 90)0%Also, outside the quota pays an additional 50%0%··
7208 54 00 Flat-rolled products of iron or non-alloy steel › Of a thickness of less than 3 mmCompare with other products (7208 54 00)0%Also, outside the quota pays an additional 50%0%··
7208 90 20 Flat-rolled products of iron or non-alloy steel › PerforatedCompare with other products (7208 90 20)0%Also, outside the quota pays an additional 50%0%··
7208 90 80 Flat-rolled products of iron or non-alloy steel › OtherCompare with other products (7208 90 80)0%Also, outside the quota pays an additional 50%0%··
7209 · Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated · 17 lines
LineToday under the agreementWithout itReaches 0Quota
7209 15 00 Flat-rolled products of iron or non-alloy steel › Of a thickness of 3 mm or moreCompare with other products (7209 15 00)0%Also, outside the quota pays an additional 50%0%··
7209 16 10 Flat-rolled products of iron or non-alloy steel › ‘Electrical’Compare with other products (7209 16 10)0%Also, outside the quota pays an additional 50%0%··
7209 16 90 Flat-rolled products of iron or non-alloy steel › Of a thickness exceeding 1 mm but less than 3 mm › OtherCompare with other products (7209 16 90)0%Also, outside the quota pays an additional 50%0%··
7209 17 10 Flat-rolled products of iron or non-alloy steel › ‘Electrical’Compare with other products (7209 17 10)0%Also, outside the quota pays an additional 50%0%··
7209 17 90 Flat-rolled products of iron or non-alloy steel › Of a thickness of 0,5 mm or more but not exceeding 1 mm › OtherCompare with other products (7209 17 90)0%Also, outside the quota pays an additional 50%0%··
7209 18 10 Flat-rolled products of iron or non-alloy steel › ‘Electrical’Compare with other products (7209 18 10)0%Also, outside the quota pays an additional 50%0%··
7209 18 91 Flat-rolled products of iron or non-alloy steel › Of a thickness of 0,35 mm or more but less than 0,5 mmCompare with other products (7209 18 91)0%Also, outside the quota pays an additional 50%0%··
7209 18 99 Flat-rolled products of iron or non-alloy steel › Of a thickness of less than 0,35 mmCompare with other products (7209 18 99)0%Also, outside the quota pays an additional 50%0%··
7209 25 00 Flat-rolled products of iron or non-alloy steel › Of a thickness of 3 mm or moreCompare with other products (7209 25 00)0%Also, outside the quota pays an additional 50%0%··
7209 26 10 Flat-rolled products of iron or non-alloy steel › ‘Electrical’Compare with other products (7209 26 10)0%Also, outside the quota pays an additional 50%0%··
7209 26 90 Flat-rolled products of iron or non-alloy steel › Of a thickness exceeding 1 mm but less than 3 mm › OtherCompare with other products (7209 26 90)0%Also, outside the quota pays an additional 50%0%··
7209 27 10 Flat-rolled products of iron or non-alloy steel › ‘Electrical’Compare with other products (7209 27 10)0%Also, outside the quota pays an additional 50%0%··
7209 27 90 Flat-rolled products of iron or non-alloy steel › Of a thickness of 0,5 mm or more but not exceeding 1 mm › OtherCompare with other products (7209 27 90)0%Also, outside the quota pays an additional 50%0%··
7209 28 10 Flat-rolled products of iron or non-alloy steel › ‘Electrical’Compare with other products (7209 28 10)0%Also, outside the quota pays an additional 50%0%··
7209 28 90 Flat-rolled products of iron or non-alloy steel › Of a thickness of less than 0,5 mm › OtherCompare with other products (7209 28 90)0%Also, outside the quota pays an additional 50%0%··
7209 90 20 Flat-rolled products of iron or non-alloy steel › PerforatedCompare with other products (7209 90 20)0%Also, outside the quota pays an additional 50%0%··
7209 90 80 Flat-rolled products of iron or non-alloy steel › OtherCompare with other products (7209 90 80)0%Also, outside the quota pays an additional 50%0%··
7210 · Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated · 15 lines
LineToday under the agreementWithout itReaches 0Quota
7210 11 00 Plated or coated › Of a thickness of 0,5 mm or moreCompare with other products (7210 11 00)0%Also, outside the quota pays an additional 50%0%··
7210 12 20 Plated or coated › TinplateCompare with other products (7210 12 20)0%Also, outside the quota pays an additional 50%0%··
7210 12 80 Plated or coated › Of a thickness of less than 0,5 mm › OtherCompare with other products (7210 12 80)0%Also, outside the quota pays an additional 50%0%··
7210 20 00 Plated or coated with lead, including terne-plateCompare with other products (7210 20 00)0%Also, outside the quota pays an additional 50%0%··
7210 30 00 Flat-rolled products of iron or non-alloy steel › Electrolytically plated or coated with zincCompare with other products (7210 30 00)0%Also, outside the quota pays an additional 50%0%··
7210 41 00 Flat-rolled products of iron or non-alloy steel › CorrugatedCompare with other products (7210 41 00)0%Also, outside the quota pays an additional 50%0%··
7210 49 00 Flat-rolled products of iron or non-alloy steel › Otherwise plated or coated with zinc › OtherCompare with other products (7210 49 00)0%Also, outside the quota pays an additional 50%0%··
7210 50 00 Plated or coated with chromium oxides or with chromium and chromium oxidesCompare with other products (7210 50 00)0%Also, outside the quota pays an additional 50%0%··
7210 61 00 Plated or coated with aluminium-zinc alloysCompare with other products (7210 61 00)0%Also, outside the quota pays an additional 50%0%··
7210 69 00 Plated or coated with aluminium › OtherCompare with other products (7210 69 00)0%Also, outside the quota pays an additional 50%0%··
7210 70 10 Flat-rolled products of iron or non-alloy steel › Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium…Compare with other products (7210 70 10)0%Also, outside the quota pays an additional 50%0%··
7210 70 80 Flat-rolled products of iron or non-alloy steel › Painted, varnished or coated with plastics › OtherCompare with other products (7210 70 80)0%Also, outside the quota pays an additional 50%0%··
7210 90 30 CladCompare with other products (7210 90 30)0%Also, outside the quota pays an additional 50%0%··
7210 90 40 Flat-rolled products of iron or non-alloy steel › Tinned and printedCompare with other products (7210 90 40)0%Also, outside the quota pays an additional 50%0%··
7210 90 80 Flat-rolled products of iron or non-alloy steel › OtherCompare with other products (7210 90 80)0%Also, outside the quota pays an additional 50%0%··
7211 · Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated · 9 lines
LineToday under the agreementWithout itReaches 0Quota
7211 13 00 Rolled on four faces or in a closed box pass, of a width > 150 mm and a thickness of ≥ 4 mm, not in coils and without patterns in reliefCompare with other products (7211 13 00)0%Also, outside the quota pays an additional 50%0%··
7211 14 00 Flat-rolled products of iron or non-alloy steel › Other, of a thickness of 4,75 mm or moreCompare with other products (7211 14 00)0%Also, outside the quota pays an additional 50%0%··
7211 19 00 Flat-rolled products of iron or non-alloy steel › Not further worked than hot-rolled › OtherCompare with other products (7211 19 00)0%Also, outside the quota pays an additional 50%0%··
7211 23 20 Flat-rolled products of iron or non-alloy steel › ‘Electrical’Compare with other products (7211 23 20)0%Also, outside the quota pays an additional 50%0%··
7211 23 30 Flat-rolled products of iron or non-alloy steel › Of a thickness of 0,35 mm or moreCompare with other products (7211 23 30)0%Also, outside the quota pays an additional 50%0%··
7211 23 80 Flat-rolled products of iron or non-alloy steel › Of a thickness of less than 0,35 mmCompare with other products (7211 23 80)0%Also, outside the quota pays an additional 50%0%··
7211 29 00 Flat-rolled products of iron or non-alloy steel › Not further worked than cold-rolled (cold-reduced) › OtherCompare with other products (7211 29 00)0%Also, outside the quota pays an additional 50%0%··
7211 90 20 Flat-rolled products of iron or non-alloy steel › PerforatedCompare with other products (7211 90 20)0%Also, outside the quota pays an additional 50%0%··
7211 90 80 Flat-rolled products of iron or non-alloy steel › OtherCompare with other products (7211 90 80)0%Also, outside the quota pays an additional 50%0%··
7212 · Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated · 13 lines
LineToday under the agreementWithout itReaches 0Quota
7212 10 10 Plated or coated › Tinplate, not further worked than surface-treatedCompare with other products (7212 10 10)0%Also, outside the quota pays an additional 50%0%··
7212 10 90 Plated or coated with tin › OtherCompare with other products (7212 10 90)0%Also, outside the quota pays an additional 50%0%··
7212 20 00 Flat-rolled products of iron or non-alloy steel › Electrolytically plated or coated with zincCompare with other products (7212 20 00)0%Also, outside the quota pays an additional 50%0%··
7212 30 00 Flat-rolled products of iron or non-alloy steel › Otherwise plated or coated with zincCompare with other products (7212 30 00)0%Also, outside the quota pays an additional 50%0%··
7212 40 20 Flat-rolled products of iron or non-alloy steel › Tinplate, not further worked than varnished; products, plated or coated with chromium oxides…Compare with other products (7212 40 20)0%Also, outside the quota pays an additional 50%0%··
7212 40 80 Flat-rolled products of iron or non-alloy steel › Painted, varnished or coated with plastics › OtherCompare with other products (7212 40 80)0%Also, outside the quota pays an additional 50%0%··
7212 50 20 Plated or coated with chromium oxides or with chromium and chromium oxidesCompare with other products (7212 50 20)0%Also, outside the quota pays an additional 50%0%··
7212 50 30 Plated or coated with chromium or nickelCompare with other products (7212 50 30)0%Also, outside the quota pays an additional 50%0%··
7212 50 40 Plated or coated with copperCompare with other products (7212 50 40)0%Also, outside the quota pays an additional 50%0%··
7212 50 61 Plated or coated with aluminium-zinc alloysCompare with other products (7212 50 61)0%Also, outside the quota pays an additional 50%0%··
7212 50 69 Plated or coated with aluminium › OtherCompare with other products (7212 50 69)0%Also, outside the quota pays an additional 50%0%··
7212 50 90 Flat-rolled products of iron or non-alloy steel › Otherwise plated or coated › OtherCompare with other products (7212 50 90)0%Also, outside the quota pays an additional 50%0%··
7212 60 00 CladCompare with other products (7212 60 00)0%Also, outside the quota pays an additional 50%0%··
7213 · Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel · 10 lines
LineToday under the agreementWithout itReaches 0Quota
7213 10 00 Bars and rods › Containing indentations, ribs, grooves or other deformations produced during the rolling processCompare with other products (7213 10 00)0%Also, outside the quota pays an additional 50%0%··
7213 20 00 Bars and rods › Other, of free-cutting steelCompare with other products (7213 20 00)0%Also, outside the quota pays an additional 50%0%··
7213 91 10 Bars and rods › Of a type used for concrete reinforcementCompare with other products (7213 91 10)0%Also, outside the quota pays an additional 50%0%··
7213 91 20 Bars and rods › Of a type used for tyre cordCompare with other products (7213 91 20)0%Also, outside the quota pays an additional 50%0%··
7213 91 41 Bars and rods › Containing by weight 0,06 % or less of carbonCompare with other products (7213 91 41)0%Also, outside the quota pays an additional 50%0%··
7213 91 49 Bars and rods › Containing by weight more than 0,06 % but less than 0,25 % of carbonCompare with other products (7213 91 49)0%Also, outside the quota pays an additional 50%0%··
7213 91 70 Bars and rods › Containing by weight 0,25 % or more but not more than 0,75 % of carbonCompare with other products (7213 91 70)0%Also, outside the quota pays an additional 50%0%··
7213 91 90 Bars and rods › Containing by weight more than 0,75 % of carbonCompare with other products (7213 91 90)0%Also, outside the quota pays an additional 50%0%··
7213 99 10 Bars and rods › Containing by weight less than 0,25 % of carbonCompare with other products (7213 99 10)0%Also, outside the quota pays an additional 50%0%··
7213 99 90 Bars and rods › Containing by weight 0,25 % or more of carbonCompare with other products (7213 99 90)0%Also, outside the quota pays an additional 50%0%··
7214 · Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted… · 12 lines
LineToday under the agreementWithout itReaches 0Quota
7214 10 00 Other bars and rods of iron or non-alloy steel › ForgedCompare with other products (7214 10 00)0%0%··
7214 20 00 Bars and rods of iron or non-alloy steel › Containing indentations, ribs, grooves or other deformations produced during the rolling process…Compare with other products (7214 20 00)0%Also, outside the quota pays an additional 50%0%··
7214 30 00 Other, of free-cutting steelCompare with other products (7214 30 00)0%Also, outside the quota pays an additional 50%0%··
7214 91 10 Other bars and rods of iron or non-alloy steel › Containing by weight less than 0,25 % of carbonCompare with other products (7214 91 10)0%Also, outside the quota pays an additional 50%0%··
7214 91 90 Other bars and rods of iron or non-alloy steel › Containing by weight 0,25 % or more of carbonCompare with other products (7214 91 90)0%Also, outside the quota pays an additional 50%0%··
7214 99 10 Other bars and rods of iron or non-alloy steel › Of a type used for concrete reinforcementCompare with other products (7214 99 10)0%Also, outside the quota pays an additional 50%0%··
7214 99 31 Other bars and rods of iron or non-alloy steel › 80 mm or moreCompare with other products (7214 99 31)0%Also, outside the quota pays an additional 50%0%··
7214 99 39 Other bars and rods of iron or non-alloy steel › Less than 80 mmCompare with other products (7214 99 39)0%Also, outside the quota pays an additional 50%0%··
7214 99 50 Other bars and rods of iron or non-alloy steel › Containing by weight less than 0,25 % of carbon › OtherCompare with other products (7214 99 50)0%Also, outside the quota pays an additional 50%0%··
7214 99 71 Other bars and rods of iron or non-alloy steel › 80 mm or moreCompare with other products (7214 99 71)0%Also, outside the quota pays an additional 50%0%··
7214 99 79 Other bars and rods of iron or non-alloy steel › Less than 80 mmCompare with other products (7214 99 79)0%Also, outside the quota pays an additional 50%0%··
7214 99 95 Other bars and rods of iron or non-alloy steel › Containing by weight 0,25 % or more of carbon › OtherCompare with other products (7214 99 95)0%Also, outside the quota pays an additional 50%0%··
7215 · Other bars and rods of iron or non-alloy steel · 5 lines
LineToday under the agreementWithout itReaches 0Quota
7215 10 00 Other bars and rods of iron or non-alloy steel › Of free-cutting steel, not further worked than cold-formed or cold-finishedCompare with other products (7215 10 00)0%Also, outside the quota pays an additional 50%0%··
7215 50 11 Other bars and rods of iron or non-alloy steel › Of rectangular (other than square) cross-sectionCompare with other products (7215 50 11)0%Also, outside the quota pays an additional 50%0%··
7215 50 19 Other bars and rods of iron or non-alloy steel › Containing by weight less than 0,25 % of carbon › OtherCompare with other products (7215 50 19)0%Also, outside the quota pays an additional 50%0%··
7215 50 80 Other bars and rods of iron or non-alloy steel › Containing by weight 0,25 % or more of carbonCompare with other products (7215 50 80)0%Also, outside the quota pays an additional 50%0%··
7215 90 00 Other bars and rods of iron or non-alloy steel › OtherCompare with other products (7215 90 00)0%Also, outside the quota pays an additional 50%0%··
7216 · Angles, shapes and sections of iron or non-alloy steel · 22 lines
LineToday under the agreementWithout itReaches 0Quota
7216 10 00 Angles › U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mmCompare with other products (7216 10 00)0%Also, outside the quota pays an additional 50%0%··
7216 21 00 Angles › L sectionsCompare with other products (7216 21 00)0%Also, outside the quota pays an additional 50%0%··
7216 22 00 Angles › T sectionsCompare with other products (7216 22 00)0%Also, outside the quota pays an additional 50%0%··
7216 31 10 Angles › Of a height of 80 mm or more but not exceeding 220 mmCompare with other products (7216 31 10)0%Also, outside the quota pays an additional 50%0%··
7216 31 90 Angles › Of a height exceeding 220 mmCompare with other products (7216 31 90)0%Also, outside the quota pays an additional 50%0%··
7216 32 11 Angles › With parallel flange facesCompare with other products (7216 32 11)0%Also, outside the quota pays an additional 50%0%··
7216 32 19 Angles › Of a height of 80 mm or more but not exceeding 220 mm › OtherCompare with other products (7216 32 19)0%Also, outside the quota pays an additional 50%0%··
7216 32 91 Angles › With parallel flange facesCompare with other products (7216 32 91)0%Also, outside the quota pays an additional 50%0%··
7216 32 99 Angles › Of a height exceeding 220 mm › OtherCompare with other products (7216 32 99)0%Also, outside the quota pays an additional 50%0%··
7216 33 10 Angles › Of a height of 80 mm or more but not exceeding 180 mmCompare with other products (7216 33 10)0%Also, outside the quota pays an additional 50%0%··
7216 33 90 Angles › Of a height exceeding 180 mmCompare with other products (7216 33 90)0%Also, outside the quota pays an additional 50%0%··
7216 40 10 Angles › L sectionsCompare with other products (7216 40 10)0%Also, outside the quota pays an additional 50%0%··
7216 40 90 Angles › T sectionsCompare with other products (7216 40 90)0%Also, outside the quota pays an additional 50%0%··
7216 50 10 Angles › With a cross-section which is capable of being enclosed in a square the side of which is 80 mmCompare with other products (7216 50 10)0%Also, outside the quota pays an additional 50%0%··
7216 50 91 Angles › Bulb flatsCompare with other products (7216 50 91)0%Also, outside the quota pays an additional 50%0%··
7216 50 99 Angles › Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded › OtherCompare with other products (7216 50 99)0%Also, outside the quota pays an additional 50%0%··
7216 61 10 Angles › C, L, U, Z, omega or open-ended sectionsCompare with other products (7216 61 10)0%0%··
7216 61 90 Angles › Obtained from flat-rolled products › OtherCompare with other products (7216 61 90)0%0%··
7216 69 00 Angles, shapes and sections, not further worked than cold-formed or cold-finished › OtherCompare with other products (7216 69 00)0%0%··
7216 91 10 Angles › Profiled (ribbed) sheetsCompare with other products (7216 91 10)0%0%··
7216 91 80 Angles › Cold-formed or cold-finished from flat-rolled products › OtherCompare with other products (7216 91 80)0%0%··
7216 99 00 Angles › OtherCompare with other products (7216 99 00)0%Also, outside the quota pays an additional 50%0%··
7217 · Wire of iron or non-alloy steel · 16 lines
LineToday under the agreementWithout itReaches 0Quota
7217 10 10 Wire of iron or non-alloy steel › With a maximum cross-sectional dimension of less than 0,8 mmCompare with other products (7217 10 10)0%Also, outside the quota pays an additional 50%0%··
7217 10 31 Wire of iron or non-alloy steel › Containing indentations, ribs, grooves or other deformations produced during the rolling processCompare with other products (7217 10 31)0%Also, outside the quota pays an additional 50%0%··
7217 10 39 Wire of iron or non-alloy steel › With a maximum cross-sectional dimension of 0,8 mm or more › OtherCompare with other products (7217 10 39)0%Also, outside the quota pays an additional 50%0%··
7217 10 50 Wire of iron or non-alloy steel › Containing by weight 0,25 % or more but less than 0,6 % of carbonCompare with other products (7217 10 50)0%Also, outside the quota pays an additional 50%0%··
7217 10 90 Wire of iron or non-alloy steel › Containing by weight 0,6 % or more of carbonCompare with other products (7217 10 90)0%Also, outside the quota pays an additional 50%0%··
7217 20 10 Wire of iron or non-alloy steel › With a maximum cross-sectional dimension of less than 0,8 mmCompare with other products (7217 20 10)0%Also, outside the quota pays an additional 50%0%··
7217 20 30 Wire of iron or non-alloy steel › With a maximum cross-sectional dimension of 0,8 mm or moreCompare with other products (7217 20 30)0%Also, outside the quota pays an additional 50%0%··
7217 20 50 Wire of iron or non-alloy steel › Containing by weight 0,25 % or more but less than 0,6 % of carbonCompare with other products (7217 20 50)0%Also, outside the quota pays an additional 50%0%··
7217 20 90 Wire of iron or non-alloy steel › Containing by weight 0,6 % or more of carbonCompare with other products (7217 20 90)0%Also, outside the quota pays an additional 50%0%··
7217 30 41 Wire of iron or non-alloy steel › Copper-coatedCompare with other products (7217 30 41)0%Also, outside the quota pays an additional 50%0%··
7217 30 49 Wire of iron or non-alloy steel › Containing by weight less than 0,25 % of carbon › OtherCompare with other products (7217 30 49)0%Also, outside the quota pays an additional 50%0%··
7217 30 50 Wire of iron or non-alloy steel › Containing by weight 0,25 % or more but less than 0,6 % of carbonCompare with other products (7217 30 50)0%Also, outside the quota pays an additional 50%0%··
7217 30 90 Wire of iron or non-alloy steel › Containing by weight 0,6 % or more of carbonCompare with other products (7217 30 90)0%Also, outside the quota pays an additional 50%0%··
7217 90 20 Wire of iron or non-alloy steel › Containing by weight less than 0,25 % of carbonCompare with other products (7217 90 20)0%Also, outside the quota pays an additional 50%0%··
7217 90 50 Wire of iron or non-alloy steel › Containing by weight 0,25 % or more but less than 0,6 % of carbonCompare with other products (7217 90 50)0%Also, outside the quota pays an additional 50%0%··
7217 90 90 Wire of iron or non-alloy steel › Containing by weight 0,6 % or more of carbonCompare with other products (7217 90 90)0%Also, outside the quota pays an additional 50%0%··
7218 · Stainless steel in ingots or other primary forms; semi-finished products of stainless steel · 7 lines
LineToday under the agreementWithout itReaches 0Quota
7218 10 00 Ingots and other primary formsCompare with other products (7218 10 00)0%0%··
7218 91 10 Stainless steel in ingots or other primary forms › Containing by weight 2,5 % or more of nickelCompare with other products (7218 91 10)0%0%··
7218 91 80 Stainless steel in ingots or other primary forms › Containing by weight less than 2,5 % of nickelCompare with other products (7218 91 80)0%0%··
7218 99 11 Stainless steel in ingots or other primary forms › Rolled or obtained by continous castingCompare with other products (7218 99 11)0%0%··
7218 99 19 Stainless steel in ingots or other primary forms › ForgedCompare with other products (7218 99 19)0%0%··
7218 99 20 Stainless steel in ingots or other primary forms › Rolled or obtained by continuous castingCompare with other products (7218 99 20)0%0%··
7218 99 80 Stainless steel in ingots or other primary forms › ForgedCompare with other products (7218 99 80)0%0%··
7219 · Flat-rolled products of stainless steel, of a width of 600 mm or more · 24 lines
LineToday under the agreementWithout itReaches 0Quota
7219 11 00 Flat-rolled products of stainless steel › Of a thickness exceeding 10 mmCompare with other products (7219 11 00)0%Also, outside the quota pays an additional 50%0%··
7219 12 10 Flat-rolled products of stainless steel › Containing by weight 2,5 % or more of nickelCompare with other products (7219 12 10)0%Also, outside the quota pays an additional 50%0%··
7219 12 90 Flat-rolled products of stainless steel › Containing by weight less than 2,5 % of nickelCompare with other products (7219 12 90)0%Also, outside the quota pays an additional 50%0%··
7219 13 10 Flat-rolled products of stainless steel › Containing by weight 2,5 % or more of nickelCompare with other products (7219 13 10)0%Also, outside the quota pays an additional 50%0%··
7219 13 90 Flat-rolled products of stainless steel › Containing by weight less than 2,5 % of nickelCompare with other products (7219 13 90)0%Also, outside the quota pays an additional 50%0%··
7219 14 10 Flat-rolled products of stainless steel › Containing by weight 2,5 % or more of nickelCompare with other products (7219 14 10)0%Also, outside the quota pays an additional 50%0%··
7219 14 90 Flat-rolled products of stainless steel › Containing by weight less than 2,5 % of nickelCompare with other products (7219 14 90)0%Also, outside the quota pays an additional 50%0%··
7219 21 10 Flat-rolled products of stainless steel › Containing by weight 2,5 % or more of nickelCompare with other products (7219 21 10)0%Also, outside the quota pays an additional 50%0%··
7219 21 90 Flat-rolled products of stainless steel › Containing by weight less than 2,5 % of nickelCompare with other products (7219 21 90)0%Also, outside the quota pays an additional 50%0%··
7219 22 10 Flat-rolled products of stainless steel › Containing by weight 2,5 % or more of nickelCompare with other products (7219 22 10)0%Also, outside the quota pays an additional 50%0%··
7219 22 90 Flat-rolled products of stainless steel › Containing by weight less than 2,5 % of nickelCompare with other products (7219 22 90)0%Also, outside the quota pays an additional 50%0%··
7219 23 00 Flat-rolled products of stainless steel › Of a thickness of 3 mm or more but less than 4,75 mmCompare with other products (7219 23 00)0%Also, outside the quota pays an additional 50%0%··
7219 24 00 Flat-rolled products of stainless steel › Of a thickness of less than 3 mmCompare with other products (7219 24 00)0%Also, outside the quota pays an additional 50%0%··
7219 31 00 Flat-rolled products of stainless steel › Of a thickness of 4,75 mm or moreCompare with other products (7219 31 00)0%Also, outside the quota pays an additional 50%0%··
7219 32 10 Flat-rolled products of stainless steel › Containing by weight 2,5 % or more of nickelCompare with other products (7219 32 10)0%Also, outside the quota pays an additional 50%0%··
7219 32 90 Flat-rolled products of stainless steel › Containing by weight less than 2,5 % of nickelCompare with other products (7219 32 90)0%Also, outside the quota pays an additional 50%0%··
7219 33 10 Flat-rolled products of stainless steel › Containing by weight 2,5 % or more of nickelCompare with other products (7219 33 10)0%Also, outside the quota pays an additional 50%0%··
7219 33 90 Flat-rolled products of stainless steel › Containing by weight less than 2,5 % of nickelCompare with other products (7219 33 90)0%Also, outside the quota pays an additional 50%0%··
7219 34 10 Flat-rolled products of stainless steel › Containing by weight 2,5 % or more of nickelCompare with other products (7219 34 10)0%Also, outside the quota pays an additional 50%0%··
7219 34 90 Flat-rolled products of stainless steel › Containing by weight less than 2,5 % of nickelCompare with other products (7219 34 90)0%Also, outside the quota pays an additional 50%0%··
7219 35 10 Flat-rolled products of stainless steel › Containing by weight 2,5 % or more of nickelCompare with other products (7219 35 10)0%Also, outside the quota pays an additional 50%0%··
7219 35 90 Flat-rolled products of stainless steel › Containing by weight less than 2,5 % of nickelCompare with other products (7219 35 90)0%Also, outside the quota pays an additional 50%0%··
7219 90 20 Flat-rolled products of stainless steel › PerforatedCompare with other products (7219 90 20)0%Also, outside the quota pays an additional 50%0%··
7219 90 80 Flat-rolled products of stainless steel › OtherCompare with other products (7219 90 80)0%Also, outside the quota pays an additional 50%0%··
7220 · Flat-rolled products of stainless steel, of a width of less than 600 mm · 10 lines
LineToday under the agreementWithout itReaches 0Quota
7220 11 00 Flat-rolled products of stainless steel › Of a thickness of 4,75 mm or moreCompare with other products (7220 11 00)0%Also, outside the quota pays an additional 50%0%··
7220 12 00 Flat-rolled products of stainless steel › Of a thickness of less than 4,75 mmCompare with other products (7220 12 00)0%Also, outside the quota pays an additional 50%0%··
7220 20 21 Flat-rolled products of stainless steel › 2,5 % or more of nickelCompare with other products (7220 20 21)0%Also, outside the quota pays an additional 50%0%··
7220 20 29 Flat-rolled products of stainless steel › Less than 2,5 % of nickelCompare with other products (7220 20 29)0%Also, outside the quota pays an additional 50%0%··
7220 20 41 Flat-rolled products of stainless steel › 2,5 % or more of nickelCompare with other products (7220 20 41)0%Also, outside the quota pays an additional 50%0%··
7220 20 49 Flat-rolled products of stainless steel › Less than 2,5 % of nickelCompare with other products (7220 20 49)0%Also, outside the quota pays an additional 50%0%··
7220 20 81 Flat-rolled products of stainless steel › 2,5 % or more of nickelCompare with other products (7220 20 81)0%Also, outside the quota pays an additional 50%0%··
7220 20 89 Flat-rolled products of stainless steel › Less than 2,5 % of nickelCompare with other products (7220 20 89)0%Also, outside the quota pays an additional 50%0%··
7220 90 20 Flat-rolled products of stainless steel › PerforatedCompare with other products (7220 90 20)0%Also, outside the quota pays an additional 50%0%··
7220 90 80 Flat-rolled products of stainless steel › OtherCompare with other products (7220 90 80)0%Also, outside the quota pays an additional 50%0%··
7221 · Bars and rods › Containing by weight 2,5 % or more of nickel · 2 lines
LineToday under the agreementWithout itReaches 0Quota
7221 00 10 Bars and rods › Containing by weight 2,5 % or more of nickelCompare with other products (7221 00 10)0%Also, outside the quota pays an additional 50%0%··
7221 00 90 Bars and rods › Containing by weight less than 2,5 % of nickelCompare with other products (7221 00 90)0%Also, outside the quota pays an additional 50%0%··
7222 · Other bars and rods of stainless steel; angles, shapes and sections of stainless steel · 20 lines
LineToday under the agreementWithout itReaches 0Quota
7222 11 11 Other bars and rods of stainless steel › 2,5 % or more of nickelCompare with other products (7222 11 11)0%Also, outside the quota pays an additional 50%0%··
7222 11 19 Other bars and rods of stainless steel › Less than 2,5 % of nickelCompare with other products (7222 11 19)0%Also, outside the quota pays an additional 50%0%··
7222 11 81 Other bars and rods of stainless steel › 2,5 % or more of nickelCompare with other products (7222 11 81)0%Also, outside the quota pays an additional 50%0%··
7222 11 89 Other bars and rods of stainless steel › Less than 2,5 % of nickelCompare with other products (7222 11 89)0%Also, outside the quota pays an additional 50%0%··
7222 19 10 Other bars and rods of stainless steel › Containing by weight 2,5 % or more of nickelCompare with other products (7222 19 10)0%Also, outside the quota pays an additional 50%0%··
7222 19 90 Other bars and rods of stainless steel › Containing by weight less than 2,5 % of nickelCompare with other products (7222 19 90)0%Also, outside the quota pays an additional 50%0%··
7222 20 11 Other bars and rods of stainless steel › 2,5 % or more of nickelCompare with other products (7222 20 11)0%Also, outside the quota pays an additional 50%0%··
7222 20 19 Other bars and rods of stainless steel › Less than 2,5 % of nickelCompare with other products (7222 20 19)0%Also, outside the quota pays an additional 50%0%··
7222 20 21 Other bars and rods of stainless steel › 2,5 % or more of nickelCompare with other products (7222 20 21)0%Also, outside the quota pays an additional 50%0%··
7222 20 29 Other bars and rods of stainless steel › Less than 2,5 % of nickelCompare with other products (7222 20 29)0%Also, outside the quota pays an additional 50%0%··
7222 20 31 Other bars and rods of stainless steel › 2,5 % or more of nickelCompare with other products (7222 20 31)0%Also, outside the quota pays an additional 50%0%··
7222 20 39 Other bars and rods of stainless steel › Less than 2,5 % of nickelCompare with other products (7222 20 39)0%Also, outside the quota pays an additional 50%0%··
7222 20 81 Other bars and rods of stainless steel › 2,5 % or more of nickelCompare with other products (7222 20 81)0%Also, outside the quota pays an additional 50%0%··
7222 20 89 Other bars and rods of stainless steel › Less than 2,5 % of nickelCompare with other products (7222 20 89)0%Also, outside the quota pays an additional 50%0%··
7222 30 51 Other bars and rods of stainless steel › 2,5 % or more of nickelCompare with other products (7222 30 51)0%Also, outside the quota pays an additional 50%0%··
7222 30 91 Other bars and rods of stainless steel › Less than 2,5 % of nickelCompare with other products (7222 30 91)0%Also, outside the quota pays an additional 50%0%··
7222 30 97 Other bars and rods › OtherCompare with other products (7222 30 97)0%Also, outside the quota pays an additional 50%0%··
7222 40 10 Angles › Not further worked than hot-rolled, hot-drawn or extrudedCompare with other products (7222 40 10)0%Also, outside the quota pays an additional 50%0%··
7222 40 50 Angles › Not further worked than cold-formed or cold-finishedCompare with other products (7222 40 50)0%Also, outside the quota pays an additional 50%0%··
7222 40 90 Angles, shapes and sections › OtherCompare with other products (7222 40 90)0%Also, outside the quota pays an additional 50%0%··
7223 · Wire of stainless steel › Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium · 4 lines
LineToday under the agreementWithout itReaches 0Quota
7223 00 11 Wire of stainless steel › Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromiumCompare with other products (7223 00 11)0%0%··
7223 00 19 Wire of stainless steel › Containing by weight 2,5 % or more of nickel › OtherCompare with other products (7223 00 19)0%0%··
7223 00 91 Wire of stainless steel › Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminiumCompare with other products (7223 00 91)0%0%··
7223 00 99 Wire of stainless steel › Containing by weight less than 2,5 % of nickel › OtherCompare with other products (7223 00 99)0%0%··
7224 · Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel · 11 lines
LineToday under the agreementWithout itReaches 0Quota
7224 10 10 Other alloy steel in ingots or other primary forms › Of tool steelCompare with other products (7224 10 10)0%0%··
7224 10 90 Ingots and other primary forms › OtherCompare with other products (7224 10 90)0%0%··
7224 90 02 Other alloy steel in ingots or other primary forms › Of tool steelCompare with other products (7224 90 02)0%0%··
7224 90 03 Other alloy steel in ingots or other primary forms › Of high-speed steelCompare with other products (7224 90 03)0%0%··
7224 90 05 Alloy steel in ingots or other primary forms › Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese…Compare with other products (7224 90 05)0%0%··
7224 90 07 Other alloy steel in ingots or other primary forms › The width measuring less than twice the thickness › OtherCompare with other products (7224 90 07)0%0%··
7224 90 14 Other alloy steel in ingots or other primary forms › Hot-rolled or obtained by continuous casting › OtherCompare with other products (7224 90 14)0%0%··
7224 90 18 Other alloy steel in ingots or other primary forms › ForgedCompare with other products (7224 90 18)0%0%··
7224 90 31 Alloy steel in ingots or other primary forms › Containing by weight ≥ 0,9 % but not more than 1,15 % of carbon, ≥ 0,5 % but not more than 2 %…Compare with other products (7224 90 31)0%0%··
7224 90 38 Other alloy steel in ingots or other primary forms › Hot-rolled or obtained by continuous casting › OtherCompare with other products (7224 90 38)0%0%··
7224 90 90 Other alloy steel in ingots or other primary forms › ForgedCompare with other products (7224 90 90)0%0%··
7225 · Flat-rolled products of other alloy steel, of a width of 600 mm or more · 16 lines
LineToday under the agreementWithout itReaches 0Quota
7225 11 00 Flat-rolled products of other alloy steel › Grain-orientedCompare with other products (7225 11 00)0%0%··
7225 19 10 Hot-rolledCompare with other products (7225 19 10)0%Also, outside the quota pays an additional 50%0%··
7225 19 90 Flat-rolled products of other alloy steel › Cold-rolledCompare with other products (7225 19 90)0%Also, outside the quota pays an additional 50%0%··
7225 30 10 Flat-rolled products of other alloy steel › Of tool steelCompare with other products (7225 30 10)0%Also, outside the quota pays an additional 50%0%··
7225 30 30 Flat-rolled products of other alloy steel › Of high-speed steelCompare with other products (7225 30 30)0%Also, outside the quota pays an additional 50%0%··
7225 30 90 Other, not further worked than hot-rolled, in coils › OtherCompare with other products (7225 30 90)0%Also, outside the quota pays an additional 50%0%··
7225 40 12 Flat-rolled products of other alloy steel › Of tool steelCompare with other products (7225 40 12)0%Also, outside the quota pays an additional 50%0%··
7225 40 15 Flat-rolled products of other alloy steel › Of high-speed steelCompare with other products (7225 40 15)0%Also, outside the quota pays an additional 50%0%··
7225 40 40 Flat-rolled products of other alloy steel › Of a thickness exceeding 10 mmCompare with other products (7225 40 40)0%Also, outside the quota pays an additional 50%0%··
7225 40 60 Flat-rolled products of other alloy steel › Of a thickness of 4,75 mm or more but not exceeding 10 mmCompare with other products (7225 40 60)0%Also, outside the quota pays an additional 50%0%··
7225 40 90 Flat-rolled products of other alloy steel › Of a thickness of less than 4,75 mmCompare with other products (7225 40 90)0%Also, outside the quota pays an additional 50%0%··
7225 50 20 Flat-rolled products of other alloy steel › Of high-speed steelCompare with other products (7225 50 20)0%Also, outside the quota pays an additional 50%0%··
7225 50 80 Other, not further worked than cold-rolled (cold-reduced) › OtherCompare with other products (7225 50 80)0%Also, outside the quota pays an additional 50%0%··
7225 91 00 Flat-rolled products of other alloy steel › Electrolytically plated or coated with zincCompare with other products (7225 91 00)0%Also, outside the quota pays an additional 50%0%··
7225 92 00 Otherwise plated or coated with zincCompare with other products (7225 92 00)0%Also, outside the quota pays an additional 50%0%··
7225 99 00 Flat-rolled products of other alloy steel › OtherCompare with other products (7225 99 00)0%Also, outside the quota pays an additional 50%0%··
7226 · Flat-rolled products of other alloy steel, of a width of less than 600 mm · 11 lines
LineToday under the agreementWithout itReaches 0Quota
7226 11 00 Flat-rolled products of other alloy steel › Grain-orientedCompare with other products (7226 11 00)0%0%··
7226 19 10 Flat-rolled products of other alloy steel › Not further worked than hot-rolledCompare with other products (7226 19 10)0%Also, outside the quota pays an additional 50%0%··
7226 19 80 Flat-rolled products of other alloy steel › Of silicon-electrical steel › OtherCompare with other products (7226 19 80)0%Also, outside the quota pays an additional 50%0%··
7226 20 00 Flat-rolled products of other alloy steel › Of high-speed steelCompare with other products (7226 20 00)0%Also, outside the quota pays an additional 50%0%··
7226 91 20 Flat-rolled products of other alloy steel › Of tool steelCompare with other products (7226 91 20)0%Also, outside the quota pays an additional 50%0%··
7226 91 91 Flat-rolled products of other alloy steel › Of a thickness of 4,75 mm or moreCompare with other products (7226 91 91)0%Also, outside the quota pays an additional 50%0%··
7226 91 99 Flat-rolled products of other alloy steel › Of a thickness of less than 4,75 mmCompare with other products (7226 91 99)0%Also, outside the quota pays an additional 50%0%··
7226 92 00 Flat-rolled products of other alloy steel › Not further worked than cold-rolled (cold-reduced)Compare with other products (7226 92 00)0%Also, outside the quota pays an additional 50%0%··
7226 99 10 Flat-rolled products of other alloy steel › Electrolytically plated or coated with zincCompare with other products (7226 99 10)0%Also, outside the quota pays an additional 50%0%··
7226 99 30 Otherwise plated or coated with zincCompare with other products (7226 99 30)0%Also, outside the quota pays an additional 50%0%··
7226 99 70 Flat-rolled products of other alloy steel › OtherCompare with other products (7226 99 70)0%Also, outside the quota pays an additional 50%0%··
7227 · Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel · 5 lines
LineToday under the agreementWithout itReaches 0Quota
7227 10 00 Bars and rods › Of high-speed steelCompare with other products (7227 10 00)0%Also, outside the quota pays an additional 50%0%··
7227 20 00 Bars and rods › Of silico-manganese steelCompare with other products (7227 20 00)0%Also, outside the quota pays an additional 50%0%··
7227 90 10 Bars and rods › Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1 to this…Compare with other products (7227 90 10)0%Also, outside the quota pays an additional 50%0%··
7227 90 50 Bars and rods › Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if…Compare with other products (7227 90 50)0%Also, outside the quota pays an additional 50%0%··
7227 90 95 Bars and rods › OtherCompare with other products (7227 90 95)0%Also, outside the quota pays an additional 50%0%··
7228 · Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel · 25 lines
LineToday under the agreementWithout itReaches 0Quota
7228 10 20 Bars and rods of other alloy steel › Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked…Compare with other products (7228 10 20)0%Also, outside the quota pays an additional 50%0%··
7228 10 50 Other bars and rods of other alloy steel › ForgedCompare with other products (7228 10 50)0%0%··
7228 10 90 Bars and rods, of high-speed steel › OtherCompare with other products (7228 10 90)0%Also, outside the quota pays an additional 50%0%··
7228 20 10 Other bars and rods of other alloy steel › Of rectangular (other than square) cross-section, hot-rolled on four facesCompare with other products (7228 20 10)0%Also, outside the quota pays an additional 50%0%··
7228 20 91 Bars and rods of other alloy steel › Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked…Compare with other products (7228 20 91)0%Also, outside the quota pays an additional 50%0%··
7228 20 99 Bars and rods, of silico-manganese steel › OtherCompare with other products (7228 20 99)0%Also, outside the quota pays an additional 50%0%··
7228 30 20 Other bars and rods of other alloy steel › Of tool steelCompare with other products (7228 30 20)0%Also, outside the quota pays an additional 50%0%··
7228 30 41 Other bars and rods of other alloy steel › Of circular cross-section of a diameter of 80 mm or moreCompare with other products (7228 30 41)0%Also, outside the quota pays an additional 50%0%··
7228 30 49 Bars and rods of other alloy steel › Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 %…Compare with other products (7228 30 49)0%Also, outside the quota pays an additional 50%0%··
7228 30 61 Other bars and rods of other alloy steel › 80 mm or moreCompare with other products (7228 30 61)0%Also, outside the quota pays an additional 50%0%··
7228 30 69 Other bars and rods of other alloy steel › Less than 80 mmCompare with other products (7228 30 69)0%Also, outside the quota pays an additional 50%0%··
7228 30 70 Other bars and rods of other alloy steel › Of rectangular (other than square) cross-section, hot-rolled on four facesCompare with other products (7228 30 70)0%Also, outside the quota pays an additional 50%0%··
7228 30 89 Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded › OtherCompare with other products (7228 30 89)0%Also, outside the quota pays an additional 50%0%··
7228 40 10 Other bars and rods of other alloy steel › Of tool steelCompare with other products (7228 40 10)0%0%··
7228 40 90 Other bars and rods, not further worked than forged › OtherCompare with other products (7228 40 90)0%0%··
7228 50 20 Other bars and rods of other alloy steel › Of tool steelCompare with other products (7228 50 20)0%Also, outside the quota pays an additional 50%0%··
7228 50 40 Bars and rods of other alloy steel › Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 %…Compare with other products (7228 50 40)0%Also, outside the quota pays an additional 50%0%··
7228 50 61 Other bars and rods of other alloy steel › 80 mm or moreCompare with other products (7228 50 61)0%Also, outside the quota pays an additional 50%0%··
7228 50 69 Other bars and rods of other alloy steel › Less than 80 mmCompare with other products (7228 50 69)0%Also, outside the quota pays an additional 50%0%··
7228 50 80 Other bars and rods, not further worked than cold-formed or cold-finished › OtherCompare with other products (7228 50 80)0%Also, outside the quota pays an additional 50%0%··
7228 60 20 Other bars and rods of other alloy steel › Of tool steelCompare with other products (7228 60 20)0%Also, outside the quota pays an additional 50%0%··
7228 60 80 Other bars and rods › OtherCompare with other products (7228 60 80)0%Also, outside the quota pays an additional 50%0%··
7228 70 10 Angles › Not further worked than hot-rolled, hot-drawn or extrudedCompare with other products (7228 70 10)0%Also, outside the quota pays an additional 50%0%··
7228 70 90 Angles, shapes and sections › OtherCompare with other products (7228 70 90)0%Also, outside the quota pays an additional 50%0%··
7228 80 00 Hollow drill bars and rodsCompare with other products (7228 80 00)0%Also, outside the quota pays an additional 50%0%··
7229 · Wire of other alloy steel · 4 lines
LineToday under the agreementWithout itReaches 0Quota
7229 20 00 Wire of other alloy steel › Of silico-manganese steelCompare with other products (7229 20 00)0%0%··
7229 90 20 Wire of other alloy steel › Of high-speed steelCompare with other products (7229 90 20)0%0%··
7229 90 50 Wire of other alloy steel › Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium…Compare with other products (7229 90 50)0%0%··
7229 90 90 Wire of other alloy steel › OtherCompare with other products (7229 90 90)0%0%··
7301 · Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel · 2 lines
LineToday under the agreementWithout itReaches 0Quota
7301 10 00 Sheet pilingCompare with other products (7301 10 00)0%Also, outside the quota pays an additional 50%0%··
7301 20 00 Sheet piling of iron or steel › Angles, shapes and sectionsCompare with other products (7301 20 00)0%0%··
7302 · Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs… · 9 lines
LineToday under the agreementWithout itReaches 0Quota
7302 10 10 Rail clips › Current-conducting, with parts of non-ferrous metalCompare with other products (7302 10 10)0%0%··
7302 10 22 Rail clips › Of a weight per metre of 36 kg or moreCompare with other products (7302 10 22)0%Also, outside the quota pays an additional 50%0%··
7302 10 28 Rail clips › Of a weight per metre of less than 36 kgCompare with other products (7302 10 28)0%Also, outside the quota pays an additional 50%0%··
7302 10 40 Rail clips › Grooved railsCompare with other products (7302 10 40)0%Also, outside the quota pays an additional 50%0%··
7302 10 50 Rail clips › New › OtherCompare with other products (7302 10 50)0%Also, outside the quota pays an additional 50%0%··
7302 10 90 Rail clips › UsedCompare with other products (7302 10 90)0%0%··
7302 30 00 Switch blades, crossing frogs, point rods and other crossing piecesCompare with other products (7302 30 00)0%2.7%··
7302 40 00 Fish-plates and sole platesCompare with other products (7302 40 00)0%Also, outside the quota pays an additional 50%0%··
7302 90 00 Railway or tramway track construction material of iron or steel › OtherCompare with other products (7302 90 00)0%0%··
7303 · Tubes and pipes of a kind used in pressure systems · 2 lines
LineToday under the agreementWithout itReaches 0Quota
7303 00 10 Tubes and pipes of a kind used in pressure systemsCompare with other products (7303 00 10)0%3.2%··
7303 00 90 Tubes › OtherCompare with other products (7303 00 90)0%3.2%··
7304 · Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel · 28 lines
LineToday under the agreementWithout itReaches 0Quota
7304 11 00 Tubes › Of stainless steelCompare with other products (7304 11 00)0%Also, outside the quota pays an additional 50%0%··
7304 19 10 Tubes › Of an external diameter not exceeding 168,3 mmCompare with other products (7304 19 10)0%Also, outside the quota pays an additional 50%0%··
7304 19 30 Tubes › Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mmCompare with other products (7304 19 30)0%Also, outside the quota pays an additional 50%0%··
7304 19 90 Tubes › Of an external diameter exceeding 406,4 mmCompare with other products (7304 19 90)0%Also, outside the quota pays an additional 50%0%··
7304 22 00 Tubes › Drill pipe of stainless steelCompare with other products (7304 22 00)0%Also, outside the quota pays an additional 50%0%··
7304 23 00 Tubes › Other drill pipeCompare with other products (7304 23 00)0%Also, outside the quota pays an additional 50%0%··
7304 24 00 Tubes › Other, of stainless steelCompare with other products (7304 24 00)0%Also, outside the quota pays an additional 50%0%··
7304 29 10 Tubes › Of an external diameter not exceeding 168,3 mmCompare with other products (7304 29 10)0%Also, outside the quota pays an additional 50%0%··
7304 29 30 Tubes › Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mmCompare with other products (7304 29 30)0%Also, outside the quota pays an additional 50%0%··
7304 29 90 Tubes › Of an external diameter exceeding 406,4 mmCompare with other products (7304 29 90)0%Also, outside the quota pays an additional 50%0%··
7304 31 20 Tubes › Precision tubesCompare with other products (7304 31 20)0%Also, outside the quota pays an additional 50%0%··
7304 31 80 Tubes › Cold-drawn or cold-rolled (cold-reduced) › OtherCompare with other products (7304 31 80)0%Also, outside the quota pays an additional 50%0%··
7304 39 50 Tubes › Threaded or threadable tubes (gas pipe)Compare with other products (7304 39 50)0%Also, outside the quota pays an additional 50%0%··
7304 39 82 Tubes › Not exceeding 168,3 mmCompare with other products (7304 39 82)0%Also, outside the quota pays an additional 50%0%··
7304 39 83 Tubes › Exceeding 168,3 mm but not exceeding 406,4 mmCompare with other products (7304 39 83)0%Also, outside the quota pays an additional 50%0%··
7304 39 88 Tubes › Exceeding 406,4 mmCompare with other products (7304 39 88)0%Also, outside the quota pays an additional 50%0%··
7304 41 00 Tubes › Cold-drawn or cold-rolled (cold-reduced)Compare with other products (7304 41 00)0%Also, outside the quota pays an additional 50%0%··
7304 49 83 Tubes › Of an external diameter not exceeding 168,3 mmCompare with other products (7304 49 83)0%Also, outside the quota pays an additional 50%0%··
7304 49 85 Tubes › Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mmCompare with other products (7304 49 85)0%Also, outside the quota pays an additional 50%0%··
7304 49 89 Tubes › Of an external diameter exceeding 406,4 mmCompare with other products (7304 49 89)0%Also, outside the quota pays an additional 50%0%··
7304 51 10 Tubes › Straight and of uniform wall thickness, of alloy steel containing by weight ≥ 0,9 % but not more than 1,15 % of carbon, ≥ 0,5 % but not more…Compare with other products (7304 51 10)0%0%··
7304 51 81 Tubes › Precision tubesCompare with other products (7304 51 81)0%Also, outside the quota pays an additional 50%0%··
7304 51 89 Tubes › Cold-drawn or cold-rolled (cold-reduced) › OtherCompare with other products (7304 51 89)0%Also, outside the quota pays an additional 50%0%··
7304 59 30 Tubes › Straight and of uniform wall thickness, of alloy steel containing by weight ≥ 0,9 % but not more than 1,15 % of carbon, ≥ 0,5 % but not more…Compare with other products (7304 59 30)0%Also, outside the quota pays an additional 50%0%··
7304 59 82 Tubes › Of an external diameter not exceeding 168,3 mmCompare with other products (7304 59 82)0%Also, outside the quota pays an additional 50%0%··
7304 59 83 Tubes › Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mmCompare with other products (7304 59 83)0%Also, outside the quota pays an additional 50%0%··
7304 59 89 Tubes › Of an external diameter exceeding 406,4 mmCompare with other products (7304 59 89)0%Also, outside the quota pays an additional 50%0%··
7304 90 00 Tubes › OtherCompare with other products (7304 90 00)0%Also, outside the quota pays an additional 50%0%··
7305 · Other tubes and pipes, having circular cross-sections, the external diameter of which exceeds 406,4 mm, of iron or steel · 7 lines
LineToday under the agreementWithout itReaches 0Quota
7305 11 00 Other tubes and pipes › Longitudinally submerged arc weldedCompare with other products (7305 11 00)0%Also, outside the quota pays an additional 50%0%··
7305 12 00 Other, longitudinally weldedCompare with other products (7305 12 00)0%Also, outside the quota pays an additional 50%0%··
7305 19 00 Other tubes and pipes › Line pipe of a kind used for oil or gas pipelines › OtherCompare with other products (7305 19 00)0%Also, outside the quota pays an additional 50%0%··
7305 20 00 Other tubes and pipes › Casing of a kind used in drilling for oil or gasCompare with other products (7305 20 00)0%Also, outside the quota pays an additional 50%0%··
7305 31 00 Other tubes and pipes › Longitudinally weldedCompare with other products (7305 31 00)0%Also, outside the quota pays an additional 50%0%··
7305 39 00 Other, welded › OtherCompare with other products (7305 39 00)0%Also, outside the quota pays an additional 50%0%··
7305 90 00 Other tubes and pipes › OtherCompare with other products (7305 90 00)0%Also, outside the quota pays an additional 50%0%··
7306 · Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel · 22 lines
LineToday under the agreementWithout itReaches 0Quota
7306 11 00 Other tubes › Welded, of stainless steelCompare with other products (7306 11 00)0%Also, outside the quota pays an additional 50%0%··
7306 19 00 Other tubes › Line pipe of a kind used for oil or gas pipelines › OtherCompare with other products (7306 19 00)0%Also, outside the quota pays an additional 50%0%··
7306 21 00 Other tubes › Welded, of stainless steelCompare with other products (7306 21 00)0%Also, outside the quota pays an additional 50%0%··
7306 29 00 Other tubes › Casing and tubing of a kind used in drilling for oil or gas › OtherCompare with other products (7306 29 00)0%Also, outside the quota pays an additional 50%0%··
7306 30 12 Other tubes › Cold-drawn or cold-rolled (cold-reduced)Compare with other products (7306 30 12)0%Also, outside the quota pays an additional 50%0%··
7306 30 18 Other tubes › Precision tubes › OtherCompare with other products (7306 30 18)0%Also, outside the quota pays an additional 50%0%··
7306 30 41 Other tubes › Plated or coated with zincCompare with other products (7306 30 41)0%Also, outside the quota pays an additional 50%0%··
7306 30 49 Other tubes › Threaded or threadable tubes (gas pipe) › OtherCompare with other products (7306 30 49)0%Also, outside the quota pays an additional 50%0%··
7306 30 72 Other tubes › Plated or coated with zincCompare with other products (7306 30 72)0%Also, outside the quota pays an additional 50%0%··
7306 30 77 Other tubes › Not exceeding 168,3 mm › OtherCompare with other products (7306 30 77)0%Also, outside the quota pays an additional 50%0%··
7306 30 80 Other tubes › Exceeding 168,3 mm but not exceeding 406,4 mmCompare with other products (7306 30 80)0%Also, outside the quota pays an additional 50%0%··
7306 40 20 Other tubes › Cold-drawn or cold-rolled (cold-reduced)Compare with other products (7306 40 20)0%Also, outside the quota pays an additional 50%0%··
7306 40 80 Other, welded, of circular cross-section, of stainless steel › OtherCompare with other products (7306 40 80)0%Also, outside the quota pays an additional 50%0%··
7306 50 21 Other tubes › Cold-drawn or cold-rolled (cold-reduced)Compare with other products (7306 50 21)0%Also, outside the quota pays an additional 50%0%··
7306 50 29 Other tubes › Precision tubes › OtherCompare with other products (7306 50 29)0%Also, outside the quota pays an additional 50%0%··
7306 50 80 Other, welded, of circular cross-section, of other alloy steel › OtherCompare with other products (7306 50 80)0%Also, outside the quota pays an additional 50%0%··
7306 61 10 Other tubes › Of stainless steelCompare with other products (7306 61 10)0%Also, outside the quota pays an additional 50%0%··
7306 61 92 Other tubes › With a wall thickness not exceeding 2 mmCompare with other products (7306 61 92)0%Also, outside the quota pays an additional 50%0%··
7306 61 99 Other tubes › With a wall thickness exceeding 2 mmCompare with other products (7306 61 99)0%Also, outside the quota pays an additional 50%0%··
7306 69 10 Other tubes › Of stainless steelCompare with other products (7306 69 10)0%Also, outside the quota pays an additional 50%0%··
7306 69 90 Of other non-circular cross-section › OtherCompare with other products (7306 69 90)0%Also, outside the quota pays an additional 50%0%··
7306 90 00 Other tubes › OtherCompare with other products (7306 90 00)0%Also, outside the quota pays an additional 50%0%··
7307 · Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel · 20 lines
LineToday under the agreementWithout itReaches 0Quota
7307 11 10 Tube or pipe fittings › Of a kind used in pressure systemsCompare with other products (7307 11 10)2.9%3.7%1 January 2030·
7307 11 90 Tube or pipe fittings › Of non-malleable cast iron › OtherCompare with other products (7307 11 90)2.9%3.7%1 January 2030·
7307 19 10 Tube or pipe fittings › Of cast ironCompare with other products (7307 19 10)2.9%3.7%1 January 2030·
7307 19 90 Tube or pipe fittings › Cast fittings › OtherCompare with other products (7307 19 90)2.9%3.7%1 January 2030·
7307 21 00 Tube or pipe fittings › FlangesCompare with other products (7307 21 00)2.9%3.7%1 January 2030·
7307 22 10 Tube or pipe fittings › SleevesCompare with other products (7307 22 10)0%0%··
7307 22 90 Tube or pipe fittings › Elbows and bendsCompare with other products (7307 22 90)2.9%3.7%1 January 2030·
7307 23 10 Tube or pipe fittings › Elbows and bendsCompare with other products (7307 23 10)2.9%3.7%1 January 2030·
7307 23 90 Tube or pipe fittings › Butt welding fittings › OtherCompare with other products (7307 23 90)2.9%3.7%1 January 2030·
7307 29 10 Tube or pipe fittings › ThreadedCompare with other products (7307 29 10)2.9%3.7%1 January 2030·
7307 29 80 Tube or pipe fittings › Other, of stainless steel › OtherCompare with other products (7307 29 80)2.9%3.7%1 January 2030·
7307 91 00 Tube or pipe fittings › FlangesCompare with other products (7307 91 00)2.9%3.7%1 January 2030·
7307 92 10 Tube or pipe fittings › SleevesCompare with other products (7307 92 10)0%0%··
7307 92 90 Tube or pipe fittings › Elbows and bendsCompare with other products (7307 92 90)2.9%3.7%1 January 2030·
7307 93 11 Tube or pipe fittings › Elbows and bendsCompare with other products (7307 93 11)2.9%3.7%1 January 2030·
7307 93 19 Tube or pipe fittings › With greatest external diameter not exceeding 609,6 mm › OtherCompare with other products (7307 93 19)2.9%3.7%1 January 2030·
7307 93 91 Tube or pipe fittings › Elbows and bendsCompare with other products (7307 93 91)2.9%3.7%1 January 2030·
7307 93 99 Tube or pipe fittings › With greatest external diameter exceeding 609,6 mm › OtherCompare with other products (7307 93 99)2.9%3.7%1 January 2030·
7307 99 10 Tube or pipe fittings › ThreadedCompare with other products (7307 99 10)2.9%3.7%1 January 2030·
7307 99 80 Tube or pipe fittings › OtherCompare with other products (7307 99 80)2.9%3.7%1 January 2030·
7308 · Structures and parts of structures, of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures… · 8 lines
LineToday under the agreementWithout itReaches 0Quota
7308 10 00 Structures and parts of structures › Bridges and bridge-sectionsCompare with other products (7308 10 00)0%0%··
7308 20 10 Structures and parts of structures › Tubular wind turbine steel towers and tower-sectionsCompare with other products (7308 20 10)0%0%··
7308 20 90 Structures and parts of structures › Towers and lattice masts › OtherCompare with other products (7308 20 90)0%0%··
7308 30 00 Structures and parts of structures › Doors, windows and their frames and thresholds for doorsCompare with other products (7308 30 00)0%0%··
7308 40 00 Structures and parts of structures › Equipment for scaffolding, shuttering, propping or pit-proppingCompare with other products (7308 40 00)0%0%··
7308 90 51 Structures and parts of structures › Panels comprising two walls of profiled (ribbed) sheet with an insulating coreCompare with other products (7308 90 51)0%0%··
7308 90 59 Structures and parts of structures › Solely or principally of sheet › OtherCompare with other products (7308 90 59)0%0%··
7308 90 98 Structures and parts of structures › OtherCompare with other products (7308 90 98)0%0%··
7309 · Reservoirs › For gases (other than compressed or liquefied gas) · 5 lines
LineToday under the agreementWithout itReaches 0Quota
7309 00 10 Reservoirs › For gases (other than compressed or liquefied gas)Compare with other products (7309 00 10)0%2.2%··
7309 00 30 Reservoirs › Lined or heat-insulatedCompare with other products (7309 00 30)0%2.2%··
7309 00 51 Reservoirs › Exceeding 100 000 lCompare with other products (7309 00 51)0%2.2%··
7309 00 59 Reservoirs › Not exceeding 100 000 lCompare with other products (7309 00 59)0%2.2%··
7309 00 90 Reservoirs › For solidsCompare with other products (7309 00 90)0%2.2%··
7310 · Tanks, casks, drums, cans, boxes and similar containers, for any material, of iron or steel, of a capacity ≤ 300 l, whether or not lined… · 7 lines
LineToday under the agreementWithout itReaches 0Quota
7310 10 00 Tanks › Of a capacity of 50 l or moreCompare with other products (7310 10 00)0%2.7%··
7310 21 11 Cans of a kind used for preserving foodCompare with other products (7310 21 11)0%2.7%··
7310 21 19 Cans of a kind used for preserving drinkCompare with other products (7310 21 19)0%2.7%··
7310 21 91 Cans › Less than 0,5 mmCompare with other products (7310 21 91)0%2.7%··
7310 21 99 Cans › 0,5 mm or moreCompare with other products (7310 21 99)0%2.7%··
7310 29 10 Tanks › With a wall thickness of less than 0,5 mmCompare with other products (7310 29 10)0%2.7%··
7310 29 90 Tanks › With a wall thickness of 0,5 mm or moreCompare with other products (7310 29 90)0%2.7%··
7311 · Containers for compressed or liquefied gas › Less than 20 l · 6 lines
LineToday under the agreementWithout itReaches 0Quota
7311 00 11 Containers for compressed or liquefied gas › Less than 20 lCompare with other products (7311 00 11)0%2.7%··
7311 00 13 Containers for compressed or liquefied gas › 20 l or more but not more than 50 lCompare with other products (7311 00 13)0%2.7%··
7311 00 19 Containers for compressed or liquefied gas › More than 50 lCompare with other products (7311 00 19)0%2.7%··
7311 00 30 Containers for compressed or liquefied gas › Seamless › OtherCompare with other products (7311 00 30)0%2.7%··
7311 00 91 Containers for compressed or liquefied gas › Less than 1 000 lCompare with other products (7311 00 91)0%2.7%··
7311 00 99 Containers for compressed or liquefied gas › 1 000 l or moreCompare with other products (7311 00 99)0%2.7%··
7312 · Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated · 12 lines
LineToday under the agreementWithout itReaches 0Quota
7312 10 20 Stranded wire › Of stainless steelCompare with other products (7312 10 20)0%0%··
7312 10 41 Stranded wire › Plated or coated with copper-zinc alloys (brass)Compare with other products (7312 10 41)0%0%··
7312 10 49 Stranded wire › Not exceeding 3 mm › OtherCompare with other products (7312 10 49)0%0%··
7312 10 61 Stranded wire › Not coatedCompare with other products (7312 10 61)0%0%··
7312 10 65 Stranded wire › Plated or coated with zincCompare with other products (7312 10 65)0%0%··
7312 10 69 Stranded wire › Coated › OtherCompare with other products (7312 10 69)0%0%··
7312 10 81 Stranded wire › Exceeding 3 mm but not exceeding 12 mmCompare with other products (7312 10 81)0%0%··
7312 10 83 Stranded wire › Exceeding 12 mm but not exceeding 24 mmCompare with other products (7312 10 83)0%0%··
7312 10 85 Stranded wire › Exceeding 24 mm but not exceeding 48 mmCompare with other products (7312 10 85)0%0%··
7312 10 89 Stranded wire › Exceeding 48 mmCompare with other products (7312 10 89)0%0%··
7312 10 98 Stranded wire › Ropes and cables (including locked coil ropes) › OtherCompare with other products (7312 10 98)0%0%··
7312 90 00 Stranded wire › OtherCompare with other products (7312 90 00)0%0%··
7313 · Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron… · 1 line
LineToday under the agreementWithout itReaches 0Quota
7313 00 00 Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron…Compare with other products (7313 00 00)0%0%··
7314 · Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel · 11 lines
LineToday under the agreementWithout itReaches 0Quota
7314 12 00 Cloth › Endless bands for machinery, of stainless steelCompare with other products (7314 12 00)0%0%··
7314 14 00 Cloth › Other woven cloth, of stainless steelCompare with other products (7314 14 00)0%0%··
7314 19 00 Cloth › Woven cloth › OtherCompare with other products (7314 19 00)0%0%··
7314 20 10 Grill › Of ribbed wireCompare with other products (7314 20 10)0%0%··
7314 20 90 Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size…Compare with other products (7314 20 90)0%0%··
7314 31 00 Grill › Plated or coated with zincCompare with other products (7314 31 00)0%0%··
7314 39 00 Grill › Other grill, netting and fencing, welded at the intersection › OtherCompare with other products (7314 39 00)0%0%··
7314 41 00 Cloth › Plated or coated with zincCompare with other products (7314 41 00)0%0%··
7314 42 00 Cloth › Coated with plasticsCompare with other products (7314 42 00)0%0%··
7314 49 00 Cloth › Other cloth, grill, netting and fencing › OtherCompare with other products (7314 49 00)0%0%··
7314 50 00 Expanded metalCompare with other products (7314 50 00)0%0%··
7315 · Chain and parts thereof, of iron or steel · 9 lines
LineToday under the agreementWithout itReaches 0Quota
7315 11 10 Chain and parts thereof › Of a kind used for cycles and motorcyclesCompare with other products (7315 11 10)0%2.7%··
7315 11 90 Chain and parts thereof › Roller chain › OtherCompare with other products (7315 11 90)0%2.7%··
7315 12 00 Other chainCompare with other products (7315 12 00)0%2.7%··
7315 19 00 PartsCompare with other products (7315 19 00)0%2.7%··
7315 20 00 Chain and parts thereof › Skid chainCompare with other products (7315 20 00)0%2.7%··
7315 81 00 Chain and parts thereof › Stud-linkCompare with other products (7315 81 00)0%2.7%··
7315 82 00 Chain and parts thereof › Other, welded linkCompare with other products (7315 82 00)0%2.7%··
7315 89 00 Chain and parts thereof › Other chain › OtherCompare with other products (7315 89 00)0%2.7%··
7315 90 00 Chain and parts thereof › Other partsCompare with other products (7315 90 00)0%2.7%··
7316 · Anchors, grapnels and parts thereof, of iron or steel · 1 line
LineToday under the agreementWithout itReaches 0Quota
7316 00 00 Anchors, grapnels and parts thereof, of iron or steelCompare with other products (7316 00 00)0%2.7%··
7317 · Nails in strips or coils · 3 lines
LineToday under the agreementWithout itReaches 0Quota
7317 00 20 Nails in strips or coilsCompare with other products (7317 00 20)0%0%··
7317 00 60 Nails › Made from wire › OtherCompare with other products (7317 00 60)0%0%··
7317 00 80 Nails › OtherCompare with other products (7317 00 80)0%0%··
7318 · Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers and similar articles, of iron or steel · 31 lines
LineToday under the agreementWithout itReaches 0Quota
7318 11 00 Coach screwsCompare with other products (7318 11 00)0%3.7%··
7318 12 10 Screws › Of stainless steelCompare with other products (7318 12 10)0%3.7%··
7318 12 90 Screws › Other wood screws › OtherCompare with other products (7318 12 90)0%3.7%··
7318 13 00 Screw hooks and screw ringsCompare with other products (7318 13 00)0%3.7%··
7318 14 10 Screws › Of stainless steelCompare with other products (7318 14 10)0%3.7%··
7318 14 91 Screws › Spaced-thread screwsCompare with other products (7318 14 91)0%3.7%··
7318 14 99 Screws › Self-tapping screws › OtherCompare with other products (7318 14 99)0%3.7%··
7318 15 20 Screws › For fixing railway track construction materialCompare with other products (7318 15 20)0%3.7%··
7318 15 35 Screws › Of stainless steelCompare with other products (7318 15 35)0%3.7%··
7318 15 42 Screws › Of less than 800 MPaCompare with other products (7318 15 42)0%3.7%··
7318 15 48 Screws › Of 800 MPa or moreCompare with other products (7318 15 48)0%3.7%··
7318 15 52 Screws › Of stainless steelCompare with other products (7318 15 52)0%3.7%··
7318 15 58 Screws › Slotted or cross-recessed heads › OtherCompare with other products (7318 15 58)0%3.7%··
7318 15 62 Screws › Of stainless steelCompare with other products (7318 15 62)0%3.7%··
7318 15 68 Screws › Hexagonal-socket heads › OtherCompare with other products (7318 15 68)0%3.7%··
7318 15 75 Screws › Of stainless steelCompare with other products (7318 15 75)0%3.7%··
7318 15 82 Screws › Of less than 800 MPaCompare with other products (7318 15 82)0%3.7%··
7318 15 88 Screws › Of 800 MPa or moreCompare with other products (7318 15 88)0%3.7%··
7318 15 95 Screws › With heads › OtherCompare with other products (7318 15 95)0%3.7%··
7318 16 31 Nuts › Blind rivet nutsCompare with other products (7318 16 31)0%3.7%··
7318 16 39 Nuts › Of stainless steel › OtherCompare with other products (7318 16 39)0%3.7%··
7318 16 40 Nuts › Blind rivet nutsCompare with other products (7318 16 40)0%3.7%··
7318 16 60 Nuts › Self-locking nutsCompare with other products (7318 16 60)0%3.7%··
7318 16 92 Nuts › Not exceeding 12 mmCompare with other products (7318 16 92)0%3.7%··
7318 16 99 Nuts › Exceeding 12 mmCompare with other products (7318 16 99)0%3.7%··
7318 19 00 Screws › Threaded articles › OtherCompare with other products (7318 19 00)0%3.7%··
7318 21 00 Screws › Spring washers and other lock washersCompare with other products (7318 21 00)0%3.7%··
7318 22 00 Other washersCompare with other products (7318 22 00)0%3.7%··
7318 23 00 RivetsCompare with other products (7318 23 00)0%3.7%··
7318 24 00 Cotters and cotter pinsCompare with other products (7318 24 00)0%3.7%··
7318 29 00 Screws › Non-threaded articles › OtherCompare with other products (7318 29 00)0%3.7%··
7319 · Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety… · 3 lines
LineToday under the agreementWithout itReaches 0Quota
7319 40 00 Safety pins and other pinsCompare with other products (7319 40 00)0%2.7%··
7319 90 10 Sewing, darning or embroidery needlesCompare with other products (7319 90 10)0%2.7%··
7319 90 90 Sewing needles › OtherCompare with other products (7319 90 90)0%2.7%··
7320 · Springs and leaves for springs, of iron or steel · 10 lines
LineToday under the agreementWithout itReaches 0Quota
7320 10 11 Springs and leaves for springs › Laminated springs and leaves thereforCompare with other products (7320 10 11)0%2.7%··
7320 10 19 Springs and leaves for springs › Hot-worked › OtherCompare with other products (7320 10 19)0%2.7%··
7320 10 90 Springs and leaves for springs › Leaf-springs and leaves therefor › OtherCompare with other products (7320 10 90)0%2.7%··
7320 20 20 Springs and leaves for springs › Hot-workedCompare with other products (7320 20 20)0%2.7%··
7320 20 81 Springs and leaves for springs › Coil compression springsCompare with other products (7320 20 81)0%2.7%··
7320 20 85 Springs and leaves for springs › Coil tension springsCompare with other products (7320 20 85)0%2.7%··
7320 20 89 Springs and leaves for springs › Helical springs › OtherCompare with other products (7320 20 89)0%2.7%··
7320 90 10 Springs and leaves for springs › Flat spiral springsCompare with other products (7320 90 10)0%2.7%··
7320 90 30 Springs and leaves for springs › Discs springsCompare with other products (7320 90 30)0%2.7%··
7320 90 90 Springs and leaves for springs › OtherCompare with other products (7320 90 90)0%2.7%··
7321 · Stoves, ranges, grates, cookers, barbecues, braziers, gas rings, plate warmers and similar non-electric domestic appliances, and parts thereof… · 8 lines
LineToday under the agreementWithout itReaches 0Quota
7321 11 10 Stoves › With oven, including separate ovensCompare with other products (7321 11 10)0%2.7%··
7321 11 90 Stoves › For gas fuel or for both gas and other fuels › OtherCompare with other products (7321 11 90)0%2.7%··
7321 12 00 Stoves › For liquid fuelCompare with other products (7321 12 00)0%2.7%··
7321 19 00 Stoves › Other, including appliances for solid fuelCompare with other products (7321 19 00)0%2.7%··
7321 81 00 Stoves › For gas fuel or for both gas and other fuelsCompare with other products (7321 81 00)0%2.7%··
7321 82 00 Stoves › For liquid fuelCompare with other products (7321 82 00)0%2.7%··
7321 89 00 Stoves › Other, including appliances for solid fuelCompare with other products (7321 89 00)0%2.7%··
7321 90 00 PartsCompare with other products (7321 90 00)0%2.7%··
7322 · Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot-air distributors, not electrically… · 3 lines
LineToday under the agreementWithout itReaches 0Quota
7322 11 00 Radiators for central heating › Of cast ironCompare with other products (7322 11 00)0%3.2%··
7322 19 00 Radiators and parts thereof › OtherCompare with other products (7322 19 00)0%3.2%··
7322 90 00 Radiators for central heating › OtherCompare with other products (7322 90 00)0%3.2%··
7323 · Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads… · 6 lines
LineToday under the agreementWithout itReaches 0Quota
7323 10 00 Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the likeCompare with other products (7323 10 00)0%3.2%··
7323 91 00 Table › Of cast iron, not enamelledCompare with other products (7323 91 00)0%3.2%··
7323 92 00 Table › Of cast iron, enamelledCompare with other products (7323 92 00)0%3.2%··
7323 93 00 Table › Of stainless steelCompare with other products (7323 93 00)0%3.2%··
7323 94 00 Table › Of iron (other than cast iron) or steel, enamelledCompare with other products (7323 94 00)0%3.2%··
7323 99 00 Table › OtherCompare with other products (7323 99 00)0%3.2%··
7324 · Sanitary ware and parts thereof, of iron or steel · 4 lines
LineToday under the agreementWithout itReaches 0Quota
7324 10 00 Sanitary ware and parts thereof › Sinks and washbasins, of stainless steelCompare with other products (7324 10 00)0%2.7%··
7324 21 00 Sanitary ware and parts thereof › Of cast iron, whether or not enamelledCompare with other products (7324 21 00)0%3.2%··
7324 29 00 Sanitary ware and parts thereof › Baths › OtherCompare with other products (7324 29 00)0%3.2%··
7324 90 00 Sanitary ware and parts thereof › Other, including partsCompare with other products (7324 90 00)0%3.2%··
7325 · Other cast articles of iron or steel · 4 lines
LineToday under the agreementWithout itReaches 0Quota
7325 10 00 Other cast articles of iron or steel › Of non-malleable cast ironCompare with other products (7325 10 00)0%1.7%··
7325 91 00 Other cast articles of iron or steel › Grinding balls and similar articles for millsCompare with other products (7325 91 00)0%2.7%··
7325 99 10 Of cast ironCompare with other products (7325 99 10)0%2.7%··
7325 99 90 Other cast articles of iron or steel › OtherCompare with other products (7325 99 90)0%2.7%··
7326 · Other articles of iron or steel · 12 lines
LineToday under the agreementWithout itReaches 0Quota
7326 11 00 Other articles of iron or steel › Grinding balls and similar articles for millsCompare with other products (7326 11 00)0%2.7%··
7326 19 10 Other articles of iron or steel › Open-die forgedCompare with other products (7326 19 10)0%2.7%··
7326 19 90 Other articles of iron or steel › Forged or stamped, but not further worked › OtherCompare with other products (7326 19 90)0%2.7%··
7326 20 00 Articles of iron or steel wireCompare with other products (7326 20 00)0%2.7%··
7326 90 30 Other articles of iron or steel › Ladders and stepsCompare with other products (7326 90 30)0%2.7%··
7326 90 40 Other articles of iron or steel › Pallets and similar platforms for handling goodsCompare with other products (7326 90 40)0%2.7%··
7326 90 50 Other articles of iron or steel › Reels for cables, piping and the likeCompare with other products (7326 90 50)0%2.7%··
7326 90 60 Other articles of iron or steel › Non-mechanical ventilators, guttering, hooks and like articles used in the building industryCompare with other products (7326 90 60)0%2.7%··
7326 90 92 Other articles of iron or steel › Open-die forgedCompare with other products (7326 90 92)0%2.7%··
7326 90 94 Other articles of iron or steel › Closed-die forgedCompare with other products (7326 90 94)0%2.7%··
7326 90 96 Other articles of iron or steel › SinteredCompare with other products (7326 90 96)0%2.7%··
7326 90 98 Other articles of iron or steel › OtherCompare with other products (7326 90 98)0%2.7%··

Sources EU-Mercosur Agreement, Appendix 2-A-1 (EU schedule) · Implementing Regulation (EU) 2025/1926, Annex I (Combined Nomenclature 2026)

On top of the duty, trade defence

The agreement lowers the customs duty. What follows is something else, trade defence measures the EU charges separately to protect its industry (from the surge in ferro-alloy imports, or from the global excess of steel). The agreement does not remove them, they are paid on top of the duty, with or without the preference.

What the additional duty is. It is added to the duty and charged on the same customs value. A €100,000 shipment entering outside the quota pays €50,000 of additional duty, with or without the agreement's preference. Within the quota it is not paid. Quotas go by product category and are allocated each quarter, first come, first served, on the day the importer clears the goods; Argentina may use the quotas for countries with an EU agreement and those for all other countries. The sheet of each line gives its quota numbers, so the importer should check the balance before shipment. Since 1 October 2026 the importer must also prove where the steel was melted and poured (Article 4 of Regulation (EU) 2026/1384), with the mill certificate.

How the minimum price works. It is not a percentage. If the goods enter outside the quota and the price per tonne at the EU border, before customs clearance, is below €2,408/t, the importer pays the difference. At €2,000/t it pays €408 per tonne, and at €2,408/t or more it pays nothing.

How to avoid paying the difference. Within the quota it is not paid. Argentina may use quota 09.8666 (for all other countries), allocated first come, first served on the day the importer clears the goods.

The sheet of each line says how much is paid, which subdivision it applies to, how to avoid it when there is a quota and how to add it to the figures.

Tariff-rate quotas

No line of this sector has a quota of the agreement for Argentina. Each reduction applies to any quantity.

Requirements

The requirements loaded for the lines of the sector, with how many each one covers. Each sheet has the detail for its line.

What Access2Markets lists in the EU

The requirements the European Commission's Access2Markets database assigns to the 578 lines checked.

RequirementLines
Technical specifications for construction products547
Carbon Border Adjustment Mechanism478
Technical standards for motor vehicles354
Technical standards for civil aircrafts105
Technical standards for pressure equipment101
Packaging33
Waste control33
Health control of articles in contact with food products21
Marketing of products containing fluorinated greenhouse gases20
Technical standards for machinery and safety components20
General product safety16
Technical standards for simple pressure vessels15
Ozone-depleting substances and products14
Technical standards for components of the rail system10
Marketing requirements for pesticides and biocides8
Technical standards for personal protective equipment8
Technical standards for household gas appliances7
Energy efficiency requirements for local space heaters4
Energy efficiency requirements for space heaters and combination heaters3
Technical standards for recreational crafts3
Ecodesign requirements for standby and off mode, and networked standby, electric power consumption of electrical and electronic household and office equipment2
Energy efficiency requirements for domestic cooking appliances2
Ecodesign requirements for certain air heating and cooling products1
Technical standards for outdoor equipment contributing to environmental noise emission1

Source Access2Markets

What the European Union imports

In 2025 the European Union imported €72,637 million from outside the Union in 576 lines of this sector. From Argentina, €25.6 million (less than 0.1% of the total). That is 0.3% of everything the European Union bought from Argentina in 2025.

The lines where Argentina sells the most

LineEU importsFrom ArgentinaTop supplier
7304 29 30 Tubes › Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mmCompare with other products (7304 29 30)€122.0 million€5.5 million (5th)Brazil
7202 99 80 Ferro-alloys › OtherCompare with other products (7202 99 80)€54.0 million€3.9 million (3rd)Brazil
7202 29 10 Ferro-alloys › Containing by weight 4 % or more but not more than 10 % of magnesiumCompare with other products (7202 29 10)€13.9 million€2.8 million (3rd)India
7318 19 00 Screws › Threaded articles › OtherCompare with other products (7318 19 00)€494.2 million€2.6 million (12th)China
7306 19 00 Other tubes › Line pipe of a kind used for oil or gas pipelines › OtherCompare with other products (7306 19 00)€49.1 million€2.1 million (5th)Türkiye
7310 10 00 Tanks › Of a capacity of 50 l or moreCompare with other products (7310 10 00)€119.4 million€1.3 million (13th)Switzerland
7304 19 10 Tubes › Of an external diameter not exceeding 168,3 mmCompare with other products (7304 19 10)€31.7 million€1.2 million (5th)Ukraine
7204 21 10 Ferrous waste and scrap › Containing by weight 8 % or more of nickelCompare with other products (7204 21 10)€271.1 million€1.1 million (28th)Türkiye
7326 90 98 Other articles of iron or steel › OtherCompare with other products (7326 90 98)€5,260 million€934,373 (40th)China
7304 29 10 Tubes › Of an external diameter not exceeding 168,3 mmCompare with other products (7304 29 10)€21.9 million€668,886 (7th)Brazil

The totals leave out the trade Eurostat publishes as confidential.

Source Eurostat · Comext (DS-045409), 2025

This guide summarises the sheets of its lines. For a given product, open the sheet of its line, which also has the rule of origin, the paperwork in order and the calculator. See all the guides.

Search a product